Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Some modems supports multiple access technologies.
The access technology of the serving cell can be extracted from the
+CEREG command, which is already sent to the modem.
The parse function is extended to also parse the access technology value.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/51153.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
All drivers using 'modem_pin' abstraction were converted already, so remove
its implementation now.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The previous bf68b67 commit incorrectly passes minfo.mdm_rssi
value to the modem context data_rssi member during the driver
initialization which causes the `modem info` shell command
to return 0 as RSSI value. Fix that by changing data_rssi
modem ctx member to a pointer that is assigned to the RSSI
variable stored within the modem driver context structure.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Changes the modem_context_sprint_ip addr to write into a provided
buffer. This approach fixes a referencing to a non existing stack
variable, without using a lot of stack space.
Tested using the by building all used modems and tested on HW using
IPv4.
Fixes: #38459
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
This PR addresses radio signal stength measurement during
and before PPP session. The PR provides provides facility
of readout for both +CSQ and +CESQ versions depending
upon the modems. This PR follows the idea of rssi readout
of PR#35496. Additionally, reliable Cell info update
is also ensured.
Signed-off-by: Tahir Akram <mtahirbutt@hotmail.com>
Implement numerical network operator id, location area code (LAC)
and cell id in modem context and modem shell.
Please note that the functionality to query these values must be
implemented in the modem driver.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds an option to query the modem for the SIM's IMSI and ICCID
numbers, just like the modem's IMEI is queried today. This requires
the SIM to be present, which might not be the case for all
applications, so it can be disabled.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Compile errors because of missing include file and typos
when accessing variables in the modem_pin struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After startup ublox-sara-r4 code sets the MDM_POWER signal to input
using a deprecated configuration macro. This was the only use of the
modem context API to configure a pin.
Refactor the API to not take the flags as an input but instead select
between the flags to be used when the pin is active and a disconnected
state. Use this API instead of a separate direct configure call when
initializing the modem pins.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Initial support for modems in Zephyr use the following driver model:
- Main portions of code live in the modem specific driver.
This includes internal socket management, command parsing, etc.
- They leverage a UART-based modem receiver helper to gather data.
- Interface with Zephyr networking via net_context offload APIs.
This implementation was good enough to kick start interest in
supporting modem usage in Zephyr, but lacks future scalability:
- The net_context offload APIs don't allow for operations such
as offloaded DNS, SSL/TLS and other HW specific features.
- Since most of the code lives within the modem drivers, it's
very hard for the Zephyr community to improve the driver layer
over time. Bugs found in 1 driver probably affect others due
to copy/paste method of development.
- Lack of abstraction for different modem interfaces and command
handlers makes it impossible to write a "dummy" layer which
could be used for testing.
- Lack of centralized processing makes implementing low power modes
and other advanced topics more difficult.
Introducing the modem context helper driver and sub-layers:
- modem context helper acts as an umbrella for several configurable
layers and exposes this data to externals such as the modem shell.
Included in the helper is GPIO pin config functions which are
currently duplicated in most drivers.
- modem interface layer: this layer sits on the HW APIs for the
peripheral which communicates with the modem. Users of the modem
interface can handle data via read/write functions. Individual
modem drivers can select from (potentially) several modem
interfaces.
- modem command parser layer: this layer communicates with the
modem interface and processes the data for use by modem drivers.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17922
Signed-off-by: Michael Scott <mike@foundries.io>
Henrik Brix Andersen
Benjamin Cabé
Jeppe Odgaard
Marcin Niestroj
Gerard Marull-Paretas
Bartosz Bilas
Sjors Hettinga
Tahir Akram
Hans Wilmers
Tomasz Bursztyka
Göran Weinholt
Kumar Gala
Jukka Rissanen
Peter Bigot
Michael Scott