Use the same Kconfig for all drivers to configure if the FCS bytes
(checksum) should be included in the packets passed to L2.
The description is slightly reworded to make clear that it does not
only affect the length, but the packet content itself.
Signed-off-by: Martin Jäger <martin@libre.solar>
Add Kconfig option `OPENTHREAD_WAKEUP_COORDINATOR` to enable
the Wake-up Coordinator role. Implement API to set Coordinated
Sampled Transmitting sample time and period for a driver that supports
`IEE802154_OPENTHREAD_HW_CST` capability.
The feature is be enabled on with ieee802154_nrf5 driver with option
by setting default value of CONFIG_IEEE802154_NRF5_CST_ENDPOINT.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The new Kconfig option `IEEE802154_NRF5_CST_ENDPOINT` is added.
When it is enabled, then capability `IEE802154_OPENTHREAD_HW_CST`
is supported by the ieee802154_nrf5 driver and allows to set the
CST period and CST expected transmission time point.
This feature is an OpenThread-specific extention to the
ieee802154_nrf5 driver.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The default value of IEEE802154_NRF5_DELAY_TRX_ACC Kconfig option is
based on a symbol that is undefined for nRF54H20. It evaluates as empty,
which leads to compilation errors with very cryptic logs.
This commit assures that a sane value for IEEE802154_NRF5_DELAY_TRX_ACC
is selected at all times, avoiding the compilation errors.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The support for capability IEEE802154_OPENTHREAD_HW_MULTIPLE_CCA is added
to the ieee802154_nrf5 driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The Kconfig IEEE802154_NRF5_MULTIPLE_CCA option is added.
The new functions `z_ieee802154_nrf5_extra_cca_attempts_set` and
`z_ieee802154_nrf5_extra_cca_attempts_get` are added.
The ieee802154_nrf5.c is updated allowing to pass extra cca attempts
to nRF 802.15.4 Radio Driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Previous to this change, each individual driver option depended on
NETWORKING. Instead, move dependency one level up.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make all drivers default to 'y' and dependent on being enabled in DT.
This will allow simplifying many samples/tests.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_NRF5_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME.
All SoC files have been updated with the addition of an ieee802154 node
(disabled and only on those SoCs that define ieee802154-supported. The
peripheral has been enabled in the nRF52840DK board (used for testing
ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some failures are possible and expected from fime to time e.g.
NRF_802154_RX_ERROR_TIMESLOT_ENDED. Add informational log for the frame
reception failure to differentiate the specific case.
It can be helpful for analizing failure in network trafic.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Currently IEEE802154_NRF5_DELAY_TRX_ACC can exceed the max possible
value. Add upper bound to limit this.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Align clock accuracy used in CSL calculations to the value in platform.
This is recomended setting for devices working in wide range
temperature. Nevertheless it can be profiled in end product to decrease
CSL window duration and finally the power consumption.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some 802.15.4 L2 implementations expect that FCS length is included in
the overall packet length while others not. Allow to configure this
behavior, based on the selected upper layer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The shim layer could in some circumstances not be properly
configured which would result in an unbound radio interrupt
handler.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Add support for transmission modes that send a packet
at a specific time in the future.
Remove TXTIME, TXTIME_CCA, CSMA_CA capabilities and their calls when
they are not supported by selected drivers. Add TXTIME flag in
get_capabilites function.
Signed-off-by: Maciej Fabia <maciej.fabia@nordicsemi.no>
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
MPSL is a library that provides external radio IRQ source for the
802.15.4 driver. If this library is in use, the driver shall not
configure the radio IRQ.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a hidden Kconfig option indicating that a given SoC is equipped
with the IEEE 802.15.4 capable radio so that the corresponding driver
configuration can depend on it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This fixes a regression from
https://github.com/zephyrproject-rtos/zephyr/pull/5018
The ieee802154 driver wouldn't build because nrf drivers/ieee802154
depends on the nordic ext drivers to build.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
fix misspelling in Kconfig files that would show up in configuration
documentation and screens.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix misspellings in Kconfig help text and made spelling of
RX and TX consistent (from reviewer comments)
Change-Id: Ie9d4c3863cd210e7a17b50a85a7e64156b6bf3d7
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit adds a driver for nRF5 802.15.4 radio. This driver
is a wrapper for the driver provided by ext/hal/nordic/drivers.
Change-Id: I20ee4aff3d1b994c621ba8eaab208d15d85e4c01
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Damian Krolik
Martin Jäger
Pieter De Gendt
Jędrzej Ciupis
Andrzej Kuros
Gerard Marull-Paretas
Lukasz Maciejonczyk
Robert Lubos
Rafał Kuźnia
Eduardo Montoya
Czeslaw Makarski
Maciej Fabia
Hubert Miś
Ulf Magnusson
Andrzej Głąbek
Anas Nashif
Sebastian Bøe
Tomasz Bursztyka
David B. Kinder
Wojciech Bober