Add a new driver class for drivers related to debugging, such as
trace hardware, performance counters etc.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
This commit adds the API for accessing VIRTIO devices, and adds a driver
for a VIRTIO PCIE device based on the newly added API.
This commit is based on the Virtual I/O Device (VIRTIO) Version 1.3
specification:
https://docs.oasis-open.org/virtio/virtio/v1.3/csd01/virtio-v1.3-csd01.pdf
Signed-off-by: Jakub Michalski <jmichalski@antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add top level CMakeLists.txt entry and Kconfig options along with
userspace handlers for comparator API.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Introduce core support for ARM's SCMI (System Control and
Management Interface). This includes:
* shared memory (SHMEM) driver. This consists of a suite
of functions used to interact with the shared memory area.
* shared memory and doorbell-based transport layer driver.
Data is passed between platform and agent via shared
memory. Signaling is done using polling (PRE_KERNEL) and
doorbells (POST_KERNEL). This makes use of Zephyr MBOX API
(for signaling purposes) and the SHMEM driver (for polling
and data transfer).
* core driver - acts as glue between transport and protocol
layers. Provides synchronized access to transport layer
channels and channel assignment/initialization.
* infrastructure for creating SCMI protocols
This is based on ARM's SCMI Platform Design Document: DEN0056E.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Introduces a haptics API for use with LRA driver ICs to
create haptic feedback events.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Implementation of the generic API Trusted Execution Environment driver.
This implements all basic syscalls, needed by tee driver, basic
defines and helpers to work with shared memory.
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
The MSPI(multi-bit SPI) is provided as a generic API to accommodate
advanced SPI peripherals and devices that typically require command,
address and data phases, and multiple signal lines during these phases.
While the API supports advanced features such as XIP eXecute In Place
and scrambling, it is also compatible with generic SPI.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
Add Serial Wire Debug Port interface driver API and bit-bang driver.
The driver requires a simple Hardware Interface Circuits (HICs),
where signals CLK, DOUT, DIN, ENn, OE_ENn, RESETn
are connected to board GPIOs and buffered signals SWD_CLK and SWD_DIO
to the target.
Signal OE_ENn controls the direction of the Serial Wire (SWD_DIO),
ENn the buffers SWD_CLK possibly others and enables/disables HIC.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Introduce MIPI DBI driver class. MIPI DBI devices encompass several
interface types. All interfaces have a data/command, reset, chip select,
and tearing effect signal
Beyond this, MIPI DBI operates in 3 modes:
Mode A- 16/8 data pins, one clock pin, one read/write pin. Similar to
Motorola type 6800 bus
Mode B- 16/8 data pins, one read/write pin. Similar to Intel 8080 bus
Mode C- 1 data output pin, 1 data input pin, one clock pin.
Implementable using SPI peripheral, or MIPI-DBI specific controller.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Sort the Kconfig and CMakeLists include blocks again, and mark the start
and end of the blocks so that the CI can keep them sorted.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit adds the public header for the GNSS API, along
with the initial GNSS Kconfig file and an entry in the
common linker file for registered GNSS data callbacks.
A very naive implementation of the GNSS data callback is
provided as well in drivers/gnss/gnss_publish.c
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Xen-related Kconfig options were highly dependand on BOARD/SOC xenvm.
It is not correct because Xen support may be used on any board and SoC.
So, Kconfig structure was refactored, now CONFIG_XEN is located in
arch/ directory (same as in Linux kernel) and can be selected for
any Cortex-A arm64 setup (no other platforms are currently supported).
Also remove confusion in Domain 0 naming: Domain-0, initial domain,
Dom0, privileged domain etc. Now all options related to Xen Domain 0
will be controlled by CONFIG_XEN_DOM0.
Signed-off-by: Dmytro Firsov <dmytro_firsov@epam.com>
This enables -Wshadow to warn about shadow variables on
in tree code under arch/, boards/, drivers/, kernel/,
lib/, soc/, and subsys/.
Note that this does not enable it globally because
out-of-tree modules will probably take some time to fix
(or not at all depending on the project), and it would be
great to avoid introduction of any new shadow variables
in the meantime.
Also note that this tries to be done in a minimally
invasive way so it is easy to revert when we enable
-Wshadow globally. Source files under modules/, samples/
and tests/ are currently excluded because there does not
seem to be a trivial way to add -Wshadow there without
going through all CMakeLists.txt to add the option
(as there are 1000+ files to change).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The intention of hardware spinlock is to allow two processors,
that have no alternative mechanism for accomplish synchronization
and mutual exclusion operations, to share resources (such as
memory and/or any other element).
Here, we add the hwspinlock framework, that makes possible to use
those hwspinlock devices and stay platform-independent. Each
platform wishing to support hardware spinlock must describe a
driver using this framework.
Signed-off-by: Aziz Idomar <aidomar@sequans.com>
...instead of using CONFIG_ENTROPY_HAS_DRIVER. Since kconfigs
are guarded by CONFIG_ENTROPY_GENERATOR anyway, drivers are not
built unless CONFIG_ENTROPY_GENERATOR is also enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
...instead of using CONFIG_SERIAL_HAS_DRIVER. Since kconfigs
are guarded by CONFIG_SERIAL anyway, drivers are not built
unless CONFIG_SERIAL is also enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
...instead of using CONFIG_FLASH_HAS_DRIVER_ENABLED. Since
kconfigs are guarded by CONFIG_FLASH anyway, drivers are not
built unless CONFIG_FLASH is also enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce the skeleton for multi-function device drivers. This driver
class is inspired by the same class found in Linux. Multi-function
devices expose multiple functionalities, for example, a LED driver,
regulator, GPIO controller, etc. The MFD driver class serves as a kind
of "parent" device where common functionality can be managed: bus
access, IRQ sharing, initialization code, etc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add driver for communicating with EL3/EL2 layer using smc/hvc call
for Silicon vendor Provided services for INTEL AGILEX SOC FPGA.
Signed-off-by: Mahesh Rao <mahesh.rao@intel.com>
This commit adds the rtc.h header file which contains
API functions for real-time-clocks, which are low power
devices which track and represent broken-down time.
It also changes one line of doxygen documentation in the
maxim_ds3132.h file to place it in its own group.
The handlers for use of the API from userspace is also
added with this commit.
The API is split into one mandatory section, setting and
getting time, and three optional sections, alarms, update
event callback, and clock calibration.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Adds a new driver interface for retained memory devices which
can be used to store data and have it retained whilst the device is
powered thorugh different application execution states (though this
data may be lost in low power states).
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Port the gpio_keys_zephyr driver from the gpio subsystem with a
dedicated API to the input subsystem reporting input events.
Move the test as well, simplify the cases a bit since the API is simpler
now.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The Host Commands can be used with different transport layers e.g. SHI
or eSPI. The code that provides the peripheral API and allows sending
and receiving Host Commands via different transport layers is not
actually drivers of a peripheral, so move it to the
subsys/mgmt/ec_host_cmd folder.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
There are just list of child files to include, right now there's a hint
of that trying to be alphabetical but then entries have been added with
various logic, so one has to figure where stuff has to be added.
Rewrite these to:
- keep the list alphabetical, for CMakeLists unconditional first,
conditional after so one just has to select and sort
- drop the spaces in the Kconfig
- use a single space between target and directory
- rename from "Sub Systems" to "Subsystems" (single word)
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a sample sbs gauge driver with feature parity and basic tests
comparison to its sensor counter-part. Includes a simple stub test that is
extended upon.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
This introduces the I3C API for I3C controllers. Currently,
this supports one controller per bus under Zephyr.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit introduces a new api for the Dallas 1-wire protocol.
The api includes link functions for read and write operations on
bit, byte, and block level, as well as functions to reset and
lock the bus.
The bus configuration is derived from the device tree and can be
queried using w1_slave_count routine.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Add a pseudo device diver with device tree bindings for coredump.
The device tree bindings exposes memory address/size values to be
included in any dump. And the driver exposes an API to add/remove
dump memory regions at runtime.
Signed-off-by: Mark Holden <mholden@fb.com>
Implement SDHC driver for NXP USDHC peripheral, supporting all api calls
available in the sdhc driver. This implementation leverages NXP's HAL,
and simply implements a shim layer over the HAL itself.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit adds a USB Type-C Port Controller Driver for
the STM32 USB Type-C / USB Power Delivery (UCPD) peripheral
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Initial implementation of a simple GPIO controlled power domain.
It exposes no API of its own, all functionality is contained inside
the runtime power management callbacks.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This adds skeleton Kconfig/CMakeLists.txt and common implementation
of some sys_mm_drv_*() functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit adds minimal support of Xen hypervisor console via UART-like
driver. Implementation allows to use poll_in/poll_out char interface for
uart_console.c driver directly to HV console instead of using Xen
virtual PL011 UART. Future implementation will support interrupt driven
interface on Xen event channels, currently it is under development.
Also this commit introduces early console_io Xen interface, which allows
to receive printk/stdout messages quickly after start, but requires Xen,
built with CONFIG_DEBUG option.
Signed-off-by: Dmytro Firsov <dmytro_firsov@epam.com>
One limitation of the current IPM API is that it is assuming that the
hardware is only exporting one single channel through which the data can
be sent or signalling can happen.
If the hardware supports multiple channels, the IPM device must be
instantiated (possibly in the DT) several times, one for each channel to
be able to send data through multiple channels using the same hw
peripheral. Also in the current IPM API only one callback can be
registered, that means that only one driver is controlling all the
signalling happening on all the channels.
This patch is introducing a new MBOX API that is supporting
multi-channel signalling and data exachange leveraging and extending the
previous (and outdated) IPM API.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Cong Nguyen Huu
Aksel Skauge Mellbye
Jakub Michalski
Fabio Baltieri
Michal Bukowski
Jamel Arbi
Bjarki Arge Andreasen
Jilay Pandya
Laurentiu Mihalcea
Ricardo Rivera-Matos
Oleksii Moisieiev
Swift Tian
Johann Fischer
Pieter De Gendt
Daniel DeGrasse
Bjarki Arge Andreasen
Anas Nashif
Dmytro Firsov
Ricardo Rivera-Matos
Daniel Leung
Aziz Idomar
Jamie McCrae
Gerard Marull-Paretas
Mahesh Rao
Bjarki Arge Andreasen
Andrei Emeltchenko
Jamie McCrae
Dawid Niedzwiecki
Aaron Massey
Sam Hurst
Thomas Stranger
Mark Holden
Gerard Marull-Paretas
Jaska Uimonen
Andrei-Edward Popa
Jordan Yates
Carlo Caione