Add conf and overlay to run i2c_api test on: ek_ra4w1,
ek_ra4m2, ek_ra4m3, ek_ra2a1
Signed-off-by: Tri Nguyen <tri.nguyen.wj@bp.renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Fixes build failure, correct the variable is using for
k_sem_take in function test_sink_encrypted_incorrect_code
Fixes#83388
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Re-run the zephyr_get() testsuite in script mode after the project
mode testsuite has been executed. This is to ensure that the
zephyr_get() function works correctly in script mode as well.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Targets are not available in script mode.
To support the Zephyr scoping feature used by snippets and yaml module
then this commit moves from using custom targets to use GLOBAL
properties for scopes.
A scope property is prefixed with `<scope>:<property>` to avoid naming
collisions.
A `scope:<scope-name>` global property is used to track created scopes.
Tracking valid scopes ensure that properties are only set on known
scopes and thus catches typos / naming errors.
Add zephyr_scope_exists() and zephyr_get_scoped() to abstract the
implementation details of the scoped property retrieval and refactor
current code to use them.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
For a 16-bit data bus, "DT_INST_PROP_LEN(n, data_gpios)" returns 16
which is equals "MIPI_DBI_MAX_DATA_BUS_WIDTH(16)".
As a result, the assertion will always be triggered.
Use a "<=" condition for the assertion instead.
Signed-off-by: Hua Zheng <writeforever@foxmail.com>
For TFM example, MBEDTLS_PSA_CRYPTO_C has some dependencies and may not
be enabled, so use 'imply' instead of 'select' here for hostap
MBEDTLS_PSA case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Make sure not to accidentally enable WP by uninitialized variable during
FLASH_STM32_EX_OP_SECTOR_WP call.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Update the HW models module to:
71bcaa88c97977647d387217dab99f7d6f026815
Including the following:
71bcaa8 hal/nrf_cracen_rng.c: Disable until released
69e9037 hal cracen_rng: Add replacements for proposed cracen_rng hal
71c2507 CRACEN RNG: Corrected one comment
dfbc93a 54 ECB: Corrected behaviour with premature end of input joblist
a46101f 54 AAR, ECB, CCM: Correct a few notes and ECB ERRORSTATUS
74aa2de 54L15: Correct IRQ 261 name
e12ab9c Add CRACEN RNG model
91066e7 docs: UART add PTY backend to shortlist of backends
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Put most relevant links at the top. More users are interested in the
list of supported boards then the contributing guidelines.
Signed-off-by: Toon Stegen <toon@toostsolutions.be>
Fixes two isolated instances of implicit void pointer casting in spi.h.
While this is legal in C, it causes a compiler error in C++.
Signed-off-by: Dane Wagner <dane.wagner@gmail.com>
It will be have a relative high probability to get continuous memory
for the next enterprise conenction, if free station certs memory
during disconnect, thus sys_heap need less memory for big size
EAP-TLS server cert packet, otherwise more memory space needed.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Command "waitms 50" on ChromeBook EC console, then it will crash EC.
Because arch_busy_wait() is re-entried by two different tasks,
the second calling will reset the timer and may cause the first
calling to fail to reach the waiting destination
(if the first calling's wait time is longer enough).
Verified by follow test pattern:
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_api
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_error_case
west build -p auto -b it8xxx2_evb tests/kernel/timer/timer_monotonic
west build -p auto -b it8xxx2_evb tests/kernel/timer/starve
west build -p auto -b it8xxx2_evb tests/kernel/context
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Add overlay property node and configs to support tests/subsys/fs/ext2,
tests/fs/fat_fs_api and tests/subsys/sd on RA8 boards
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
These are never meant to be run, so make sure it's explicitly specified
through the build_only property.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add Silabs boards to the newly added test cases which exercise the
CONFIG_BUILD_ONLY_NO_BLOBS configuration option. Also fix the namespace to
be "peripheral" for the peripheral sample app.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add empty function stubs to support building with the newly introduced
CONFIG_BUILD_ONLY_NO_BLOBS option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Build is failing due to wrong calls to appcpu
stall and clock gating. This fixes it
by using proper registers.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Updating release notes to include the recently added Adafruit QT Py
ESP32-S3 both with and without its PSRAM version.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
The address passed in to the function was incorrect causing
failures when porting to RT1180.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Check that the GATT settings added when bonding to a peer and
subscribing to a CCC are correctly deleted when calling `bt_unpair`.
Testing hooks have been added in the Bluetooth settings abstraction
layer to know which key are being added/deleted.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
`bt_gatt_clear_cf` was calling `bt_settings_delete_ccc` instead of
`bt_settings_delete_cf`. This was causing some settings to be left over.
Fix the issue by using the correct function.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
For waking up the poll() use eventfd() instead of socketpair()
so we save some buffer space and one file descriptor.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
For the lists of properties passed as a pointer to the get_props and
set_props functions, there is no reason to not make the pointer const as
the called functions will not and should not alter the pointed-to data.
In practice, not having the pointers const can cause compilation errors
if trying to pass in a const array of properties.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
The fuel_gauge_get_props and fuel_gauge_set_prop functions were missing
casts for the device struct which causes compiler warnings when using
the -fpermissive compiler flag.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
In the fuel_gauge_get_props and fuel_gauge_set_props functions, an array
len is passed as a size_t but compared against an int, which leads to
C++ compiler warnings when using -Werror=sign-compare. The fix is to use
a size_t for the loop counter.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
Use uint64_t instead of uint32_t for the FLASH_STM32_EX_OP_SECTOR_WP
extended operation.
Some chips have two banks, more than 16 sectors each e.g. stm32h7a3xx
chips, so more than 32 bits are required.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
The `lock` arg is used multiple times in the function, making the
`ARG_UNUSED(lock);` redundant, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Expand test_sink_encrypted_incorrect_code to retry the sync with
the correct broadcast code after failing the initial sync
with the incorrect broadcast code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In smaller projects and organizations, forking Zephyr is usually
a tenable solution for development continuity, in the case that
bug-fixes or enhancements need to be applied to Zephyr to
unblock development.
In larger organizations, perhaps in the absence of healthy patch
management, technical debt management, and open-source policies,
forking and in-tree changes can quickly get out of hand.
In other organizations, it may simply be preferable to have a
zero-forking / upstream-first policy.
Regardless of the reason, this change adds a `west patch`
command that enables users to manage patches locally in their
modules, under version control, with complete transparence.
The format of the YAML file (detailed in a previous comit)
includes fields for filename, checksum, author, email, dates,
along with pr and issue links. There are fields indicating
whether the patch is upstreamble or whether it has been merged
upstream already. There is a custom field that is not validated
and can be used for any purpose.
Workflows can be created to notify maintainers when a merged
patch may be discarded after a version or a commit bump.
In Zephyr modules, the file resides conventionally under
`zephyr/patches.yml`, and patch files reside under
`zephyr/patches/`.
Sample usage applying patches (the `-v` argument for additional
detail):
```shell
west -v patch apply
reading patch file zephyr/run-tests-with-rtt-console.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/twister-rtt-support.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/multiple_icntl.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/move-bss-to-end.patch
checking patch integrity... OK
patching zephyr... OK
4 patches applied successfully \o/
```
Cleaning previously applied patches
```shell
west patch clean
```
After manually corrupting a patch file (the `-r` option will
automatically roll-back all changes if one patch fails)
```shell
west -v patch apply -r
reading patch file zephyr/run-tests-with-rtt-console.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/twister-rtt-support.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/multiple_icntl.patch
checking patch integrity... OK
patching zephyr... OK
reading patch file zephyr/move-bss-to-end.patch
checking patch integrity... FAIL
ERROR: sha256 mismatch for zephyr/move-bss-to-end.patch:
expect: 00e42e5d89f68f8b07e355821cfcf492faa2f96b506bbe87a9b35a823fd719cb
actual: b9900e0c9472a0aaae975370b478bb26945c068497fa63ff409b21d677e5b89f
Cleaning zephyr
FATAL ERROR: failed to apply patch zephyr/move-bss-to-end.patch
```
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Setting a deadline is not a schedule point. This makes it a
perfect place to verify the behavior of the new k_reschedule()
routine at both thread and ISR level.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The routine k_reschedule() allows an application to manually force
a schedule point. Although similar to k_yield(), it has different
properties. The most significant difference is that k_yield() if
invoked from a cooperative thread will voluntarily give up execution
control to the next thread of equal or higher priority while
k_reschedule() will not.
Applications that play with EDF deadlines via k_thread_deadline_set()
may need to use k_reschedule() to force a reschedule.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
For the shell RFCOMM case, these is a stack overflow problem when do
disconnect, so need to increase the CONFIG_BT_RFCOMM_DLC_STACK_SIZE.
Set CONFIG_BT_RFCOMM_DLC_STACK_SIZE default 512.
Signed-off-by: Make Shi <make.shi@nxp.com>
Fixed bug calculating offset of registers after unused space in the ADC
register space for the SZ package parts.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
The RP2350's PWM peripheral is largely unchanged from the RP2040's, but
the higher clock frequency means the long blink delay must be lower.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Khoa Nguyen
Taeyoun Park
Cong Nguyen Huu
Luca Burelli
Torsten Rasmussen
Hua Zheng
Maochen Wang
Arif Balik
Dawid Niedzwiecki
Alberto Escolar Piedras
Toon Stegen
James Roy
Dane Wagner
Rex Chen
Ruibin Chang
Quy Tran
Johan Hedberg
Sylvio Alves
Henrik Brix Andersen
Fin Maaß
Ian Wakely
Mahesh Mahadevan
Théo Battrel
Seppo Takalo
Mikkel Jakobsen
Yong Cong Sin
Emil Gydesen
Chris Friedt
Jiafei Pan
Peter Mitsis
Make Shi
Jeff Daly
Andrew Featherstone