Adds zephyr:board and zephyr:board-supported-hw directives to the
Arduino docs in order to generate more of the boards' documentation
automatically.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit updates the device tree source files
for all STM32 boards to specify the PHY connection
type for the Ethernet configuration.
Added the `phy-connection-type` property
with the value "rmii" to the Ethernet node.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Selecting the wrong power scheme could potentially destroy the board.
Luckily, the bit can only be set once and the default build still
uses the Arduino bootloader (which has the correct setting).
Signed-off-by: Martino Facchin <m.facchin@arduino.cc>
Fix compliance check script.
Arduino nano BLE - connector.dtsi pin corrections
There were several pin mappings from Arduino pin to GPIO pin
which were not correct.
This includes Arduino pins: 7, 8, 18, 19, 21
Arduino NANO 33 BLE - init turn PWR LED on
default Power LED light on.
Signed-off-by: Kurt Eckhardt <kurte@rockisland.com>
The ADC pin assignments for the Arduino Zero, MKR Zero and Nano 33 IoT
boards were missing in the device tree files, even though the boards
advertise ADC functionality. This was highlighted recently by commit
162f728 which made it a build error.
This patch fixes the issue by adding the detailed pinout assignments
for the analog pins on these boards.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This commit removes all references to the `xtools` toolchain variant in the
board YAML files.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
The removal process was automated using the following command line:
git grep -l xtools -- boards/*.{yml,yaml} | \
xargs -n 1 -P $(nproc) \
yq -i 'del(.toolchain[] | select(. == "xtools"))'
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In all STM32 dtsi and board dts, update the st,adc-sequencer and the
st,adc-clock-source properties so they are strings.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
fu dts: arm: st: use string instead of enum
Remove all USB and CDC ACM configuration in favor of common
configuraiton.
Do not adapt board-specific configurations such as unknown PID/VID or
string descriptors. There is no justification for using them on specific
boards, and we do not have formal approval to use them in the project
tree. Also, we need more uniform configuration, since the main reason
for enabling CDC ACM here is to allow users to run examples like
hello_world right out of the box. Of course, anyone is free to customize
these settings in their fork or downstream project.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The board shares many features with other Arduinos based on STM32H747
(like the HSE in bypass mode).
Once https://github.com/zephyrproject-rtos/zephyr/pull/76542 is merged,
PF1550 support should be added too to allow switching IO voltage
from 3v3 to 1v8
Signed-off-by: Martino Facchin <m.facchin@arduino.cc>
Right now, USART1 is enabled on the M7 target variant by default, leaving
M4 without a UART to use; this is the way this port was originally
contributed.
Since then, USB was enabled on M7, changing the console backend from USART1
to USB CDC ACM; the M4 target was left unchanged.
This commit enabled USART1 on the M4 variant and disabled it on the M7
variant, so that the M4 variant can use it as its console backend.
Note that, for the M4 variant, USART1 has been assigned to `zephyr,console`
and `zephyr,shell-uart` since this port was contributed, even though USART1
was always disabled on M4.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Some changes to cleanup and clarify some device tree nodes:
* removed wrong sdram2 definition
* added all internal flash slots accessible from M4
* added all internal flash slots accessible from M7
* removed CONFIG_UART_LINE_CTRL because not needed by USB CDC ACM
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This set of changes reorganize the ethernet configuration by removing the
use a regulator to enable the PHY: the correct GPIO pin is set in code
only if the network has been configured via CONFIG_NET_L2_ETHERNET.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This fixes the following warning:
> unit address and first address in 'reg' (0x6a) don't match for
> /soc/sercom@42001800/atecc608a@15
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Features enabled by this commit:
* RNG
* Ethernet port (shell sample works without changes)
Also fixed flash addresses in docs and added the default
mapping between inputs and GPIO pins.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
`CLOCK_CONTROL` subsystem being selected directly at family level,
remove it from individual board configurations.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Features enabled by this commit:
* M7 core available with or without the Arduino MCU-based bootloader by
correctly initializing the external clock source.
* All LEDs, relays and the user button are mapped into the device tree
(samples/common/blinky works out of the box).
* USB can be used in ACM mode (samples/subsys/usb/cdc_acm works without
changes). The default Zephyr console is configured to use cdc_acm_uart0
that in turn is assigned to the only USB port available.
Also enable USB stack to make sure that the console is available by default
and twister builds don't fail with missing device and added the default USB
vendor (0x35d1 Finder SpA) and product (0x0164) numbers to match the ones
used in the original product.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Describe the lsm9ds1 sensor available in the Arduino Nano 33 BLE through
I2C.
Set the accel0 alias.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
This commit unifies the `renesas,r7fa4m1ab3cfm` compatible string used in
various platforms by making it lowercase for the `arduino_uno_r4` target.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Convert the H4 driver to the new HCI driver API. This includes updating
also any boards that use the driver, i.e. adding the appropriate
devicetree node and chosen property to them.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Enable the mac node along with the necessary pinmuxing to enable the
ethernet and usb hs peripheral. I additionally defined the
`ethernet_phy_en` node the uses a fixed regulator to release
the PHY reset.
Additionally an usb_cdc_acm node was defined to enable serial over usb for
the console.
Signed-off-by: Rahul Arasikere <arasikere.rahul@gmail.com>
Enabled the QuadSPI node and necessary pin muxing to enable interfacing
with the external flash chip on the Portenta H7 board. The jedec data was
validated with the samples/drivers/jesd216 project to extract the
JEDEC data.
Additionally added `flash` to the list of ignored tags as the flash driver
should not be built on the M4 CPU domain.
Signed-off-by: Rahul Arasikere <arasikere.rahul@gmail.com>
TOKITA Hiroshi
Benjamin Cabé
Eve Redero
IBEN EL HADJ MESSAOUD Marwa
Luca Burelli
Martino Facchin
Kurt Eckhardt
Stephanos Ioannidis
Daniel D
Guillaume Gautier
Johann Fischer
Johan Hedberg
Filip Kokosinski
Federico Di Gregorio
Jamie McCrae
Daniel DeGrasse
Felipe Neves
Reto Schneider
Erwan Gouriou
Miguel Gazquez
Jordan Yates
Johan Hedberg
Rahul Arasikere