zara/zephyr - zephyr - Gitea: Git with a cup of tea

Author	SHA1	Message	Date
Guillaume Gautier	8e4518a012	dts: arm: st: change sequencer and clock source properties into string In all STM32 dtsi and board dts, update the st,adc-sequencer and the st,adc-clock-source properties so they are strings. Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com> fu dts: arm: st: use string instead of enum	7 months ago
Federico Di Gregorio	1f5a1b50fa	boards: opta: ADC support A valid device tree configuration is provided for the ADCs of the 8 input channels and the sample adc_dt works out of the box. Obviously this is not the only possible configuration but it provides a good template for further customization without the need to lookup the ADC GPIOs and connections in the schematics. Signed-off-by: Federico Di Gregorio <fog@dndg.it>	8 months ago
Federico Di Gregorio	f8ab959d7e	boards: opta: RS485 support This set of changes enables the RS485 hardware connected to usart3 and provides some overlays that allow for easily running the modbus rtu_client and rtu_server samples on Opta. Signed-off-by: Federico Di Gregorio <fog@dndg.it>	8 months ago
Federico Di Gregorio	cf45ab85d2	boards: opta: ethernet reorganization This set of changes reorganize the ethernet configuration by removing the use a regulator to enable the PHY: the correct GPIO pin is set in code only if the network has been configured via CONFIG_NET_L2_ETHERNET. Signed-off-by: Federico Di Gregorio <fog@dndg.it>	8 months ago
Federico Di Gregorio	d5447a310e	boards: opta: initial support for M7 core Features enabled by this commit: * M7 core available with or without the Arduino MCU-based bootloader by correctly initializing the external clock source. * All LEDs, relays and the user button are mapped into the device tree (samples/common/blinky works out of the box). * USB can be used in ACM mode (samples/subsys/usb/cdc_acm works without changes). The default Zephyr console is configured to use cdc_acm_uart0 that in turn is assigned to the only USB port available. Also enable USB stack to make sure that the console is available by default and twister builds don't fail with missing device and added the default USB vendor (0x35d1 Finder SpA) and product (0x0164) numbers to match the ones used in the original product. Signed-off-by: Federico Di Gregorio <fog@dndg.it>	10 months ago