Remove trailing spaces at the end of log string.
Move arguments on the next line for readability.
Align arguments to first line.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Provide an initial video buffer in the first call to video_dequeue().
It is used by the driver for choosing between the input or output queue.
Applied to capture, capture_to_lvgl and tcpserversink samples.
Signed-off-by: Josuah Demangeon <me@josuah.net>
For the BAP broadcast sink sample handling of requested BIS sync set
to BT_BAP_BIS_SYNC_NO_PREF for one or more subgroups is now added.
In case of no preference of requested BIS then sync is adjusted to the
number of streams available when no target allocation present.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
Update psa_crypto test not work on MAX32657
This commit enable/disable flags for MAX32657 to
make it works for MAX32657.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Modify the capture sample to only run the video shell when the user
enables it with -DCONFIG_VIDEO_SHELL=y, as an alternative way to trigger
captures.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The format pitch (bytesperline) field is typically set by the bridge
drivers, i.e. DMA, ISP drivers who actually handle the memory as they
know exactly the memory layout constraints.
Application just set the pixel format and resolution and must always
read back this field to see what the driver actually sets (to allocate
buffers for example).
Also, drop format pitch setting in sensor drivers as this is not needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Configures the accelerometer polling and trigger samples to disable the
uart console when the rtt console is enabled. Having both consoles
enabled simultaneously doesn't currently work on the apard32690 platform
and it's redundant anyway.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds adxl345 streaming and trigger configurations to accelerometer
samples for profiling the performance impact of adding rtio support to
max32 spi and adxl345 accelerometer drivers.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Changes the accelerometer polling sample to include data with the FIFO
watermark trigger instead of dropping it.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Add config and overlay to samples for testing stop/standby modes:
- samples/boards/st/power_mgmt/blinky
- samples/boards/st/power_mgmt/wkup_pins
I've measured consumption for each low-power mode:
- stop (regulator in run mode) ~217 uA
- stop (regulator in low-power mode) ~206 uA
- standby mode ~3.5 uA
Low-power mode wakeup timings from the datasheet,
but it barely meets these in reality:
- stop (regulator in run mode) 3.6 us
- stop (regulator in low-power mode) 5.4 us
- standby 50 us
It's possible to use RTC as idle timer to exit from stop mode.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Add a new sample specifically for the SHT4X sensor.
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
A sample show-casing the core functionalities of the nPM2100 PMIC using
the nPM2100 EK as a shield.
Signed-off-by: Sergei Ovchinnikov <sergei.ovchinnikov@nordicsemi.no>
Current code does not build on Cortex-M0, seems like it does not like
subs:
Error: instruction not supported in Thumb16 mode -- `subs r3,#1'
Adding a unified assembler language declaration in the snippet seems to
fix the problem, also add an M0+ board so this is tested in CI.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add missing curly braces in if/while/for statements.
This is a style guideline we have that was not enforced in CI. All
issues fixed here were detected by sonarqube SCA.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sets CONFIG_TIMESLICE_SIZE=0 for tests that previously expected to run
without timeslicing enabled, and now fail with the default
CONFIG_TIMESLICE_SIZE=20. Note that timeslicing functionality is still
included, but no actual timeslicing is performed.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
M2M devices like ISPs or PxP have two separate buffer queues, i.e.
incoming and outcoming queues. For each API, the driver needs to
distinguish on which queue it needs to take action.
Add video buffer type to support this kind of devices.
- get_caps(), set/get_format(), enqueue()/dequeue(): the buffer type
is embeded in the video_caps, video_format and video_buffer structs
- video_stream_start/stop() : buffer type needs is sent as a parameter
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The video endpoints are already described in the devicetree. The
video_endpoint_id parameter in each video API is not necessary and has
no usage. Drop it.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Reverse the changes the affected API and add adjust the sample to the new
dynamic and static variations.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The nRF52840 Preview development kit is no longer available and the
text in the README.rst is changed to be "nRF52840 Development kit" and
the link to the documentation is changed to point to the production
version.
Signed-off-by: Ole Sæther <ole.saether@nordicsemi.no>
- mimxrt1170_evkb needs CONFIG_DMA_TCD_QUEUE_SIZE=4 which is required
by the I2S SAI driver
- add test harness for i2s_output
Signed-off-by: Tomas Barak <tomas.barak@nxp.com>
Add the dts and config overlay for imx8ulp_evk//adsp
to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX8ULP.
Since openamp_rsc_table sample uses IPM API and i.MX8ULP
has a mbox driver for messaging unit, we need a mailbox node.
This will load the ipm_mbox driver that exposes the IPM
interface while using a MBOX driver in the back-end.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
https://github.com/zephyrproject-rtos/zephyr/actions/runs/\
15014534061/job/42189411225
We were seeing a linker error of the form
```
picolibc/x86_64-zephyr-elf/lib/32/libc.a(libc_time_time.c.o): \
in function `time':
time.c:(.text.time+0x11): undefined reference to `gettimeofday'
```
Update the dependency from CONFIG_POSIX_TIMERS to
CONFIG_XSI_SINGLE_PROCESS for gettimeofday().
Note: this is really only a workaround. The proper solution would
be to have libc functions not depend on POSIX functions.
Specifically, here
https://github.com/zephyrproject-rtos/picolibc/blob/\
51a8b32857e75345c37652a80b5cda98b28d69e5/newlib/libc/time/\
time.c#L54
and here
https://github.com/zephyrproject-rtos/zephyr/blob/\
3a4e12899c2ae5962a64055f4739f774fb7262e5/lib/libc/common/\
source/time/time.c#L17
Also mentioned in #89068
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Radio Board 4342A is really similar to the 4338A. There are a few
difference on the pinmux, but most of the peripherals and the SoC are
the same.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Add a sample for the UART bridge driver using a USB CDC-ACM UART and a
normal one. Demonstrates how to do settings propagation (bitrate
changes) and multiple instances.
The sample needs to know what specific UART are available on each board,
so unfortunately any additional board needs its own overlay.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Turn the MBEDTLS_RSA_FULL selects into depends on.
This is how the other MBEDTLS_KEY_EXCHANGE_* Kconfig options are defined.
This is done to avoid circular dependencies.
At the same time update uses of the affected MBEDTLS_KEY_EXCHANGE_*
Kconfig options to enable/disable the dependencies which used to be
automatically handled.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The original Wi-Fi certificates are from WFA. Now replace them with
certificates that generated by myself. These certificates use
sha384WithRSAEncryption signature algorithm, and use 3072 bit RSA
public-key.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Josuah Demangeon
Stoyan Bogdanov
Jens Rehhoff Thomsen
Hui Bai
Sadik Ozer
Phi Bang Nguyen
Sai Santhosh Malae
Bindu S
Maureen Helm
Oleh Kravchenko
Mahesh Mahadevan
Jakub Wasilewski
Abderrahmane JARMOUNI
Sergei Ovchinnikov
Bartosz Miller
Fabio Baltieri
Lucas Tamborrino
Anas Nashif
Daniel Mangum
Peter Wang
Neil Chen
Benjamin Cabé
Rodrigo Peixoto
Ole Sæther
Tomas Barak
Iuliana Prodan
Chris Friedt
Jérôme Pouiller
Quang Le
Hao Luo
Tomi Fontanilles
Christian Rask
Maochen Wang