Update and enable Wi-Fi/Bluetooth software coexistence management.
This improves package handling and is recommended to be used
in high traffic scenarios.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Remove ESP heap from the sources. System heap is default heap.
Use heap adapter layer to configure used heap.
Use MEM_POOL memory request config to Wi-Fi and Bluetooth drivers.
Update the Wi-Fi and BLE memory needs.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
The station-mode channel scan method is currently set to WIFI_FAST_SCAN
which ignores the signal strength and connects to the first channel found
which may result in poor WiFi bandwidth.
Change the scan mode to scan all channels and connect to the channel with
the highest RSSI.
Fixes#84488
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Make sure all kconfig related to Wi-Fi is
in its driver area.
This commit also removes esp_timer_init() call
from Wi-Fi driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit applies several changes in the way "heap_runtime"
feature is used. It can't be split due to bisectability issues.
Whenever the feature is enabled, a new heap is created and
custom malloc/calloc/free functions are added into the build
system. Those functions are currently used for internal Wi-Fi and BLE
drivers only.
Such changes are described below:
1) Rename heap.c to esp_heap_runtime.c for better readability.
2) Rename RUNTIME_HEAP to HEAP_RUNTIME to make it similar to what is
available in Zephyr.
3) Add runtime heap to BT as such as Wi-Fi.
Fixes#79490Fixes#79470
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Checks blobs presence as dependency to allow driver build.
Goal is to avoid building in environment where blobs won't
be present (e.g GitHub CI environment).
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
The ESP32 Wi-Fi driver previously did not support APSTA mode,
enabling AP mode would disable STA mode and vice versa.
Support for APSTA has been added by introducing additional
network interface: one for STA (Interface 2) and one for
AP (Interface 1). The CONFIG_ESP32_WIFI_AP_STA_MODE option in
Kconfig now allows enabling or disabling this support.
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
- Slightly improve the name of this kconfig adding the suffix
_POLL in order to highlight that this adds a callback
function used to poll data.
- Description was also updated to point out that this symbols
might not only use the (secure) entropy driver, but also
generic number generators, some of which are not really
secure.
- The symbol was move from Kconfig to Kconfig.tls-generic because
this is where MBEDTLS_ENTROPY_C is located and since
MBEDTLS_ENTROPY_HARDWARE_ALT depends on the former (it only
makes sense if the entropy module is also enabled), we add
also the "depends on".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
In #72651, build fails due to conflict when enabling mbedTLS components.
Current Wi-Fi implementation for ESP32 can discard those selected cryptos.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When testing Wi-Fi with MQTT/HTTP/Socket features,
network stacks can be full very fast, causing network issues
and eventual crash.
By analyzing used stacks,increasing the stack size described
in this PR fixes most use cases related above.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Do not set wifi optimizations by default in order
to free up IRAM room region. In case higher throutput
is necessary, one can enable this flags to optmize it.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In order to allow proper softAP mode, wifi
libraries and wpa supplicant requires this kconfig
to be enable.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Instead of using "select" on certain EC configurations, which is
considered unsafe for various reasons, use a "depends on" and rely on
the user to set a proper configuration in the config file.
Update the respective project configurations to comply with the new
configuration scheme.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Those Kconfig options are no longer used after ESP32 WiFi driver was
converted to Zephyr WiFi mgmt and the removal of platform specific
`samples/boards/esp32/wifi`.
Fixes: d524015f82 ("samples: boards: remove esp32 wifi sample code")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
ESP32 wifi connection uses Zephyr's net stack. Once WiFi connects
in station mode, is requires the application to handle DHCPv4
negotiation. This PR adds support to automatic negotiation by
handling the dhcpv4 calls in driver layer.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Moved all MBEDTLS dependencies from prj.conf
to Kconfig as WiFi depends on it.
Update esp32 wifi driver to enable `samples/net/wifi`
to work. Commands as such as `wifi connect` and `wifi scan` are now
available.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update Wifi drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
wifi drivers that depends on native ethernet stack cannot perform
wifi API calls missing availability. This changes adds the ethernet_api
interface in wifi_mgmt so that it becomes possible.
Naming "offload" in "struct net_wifi_mgmt_offload" is kept because
Zephyr still has no supplicant to handle a full non-offloaded driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This PR adds a KConfig option that allows moving
all .noinit content related to wifi a net stack into external
ram. This free dram space to application.
Linker script files are also modified so that the content
are mapped into external ram.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
PHY TX power configuration must be added into soc level.
It was previously hardcoded in hal_espressif, which was removed.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When BT and WiFi coexists, IRAM usage increases a lot.
Add configuration that allow wifi symbols
to be placed in flash, freeing space in IRAM.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Marek Matej
Jordan Yates
Sylvio Alves
Eric Holmberg
Valerio Setti
Raffael Rostagno
Muhammad Haziq
Tomi Fontanilles
Lucas Tamborrino
Robert Lubos
Marcin Niestroj
Kumar Gala
Nazar Kazakov
Felipe Neves
Glauber Maroto Ferreira
Shubham Kulkarni