Update the interrupt driver UART drivers that use `struct ring_buf`
internally to report the number of bytes that can be pushed in
`uart_fifo_fill` without fragmentation.
Signed-off-by: Jordan Yates <jordan@embeint.com>
As it is up to a driver implementation if a partial filled buffer is
released, this behavior can be configured during runtime to allow testing
for this edge case.
Signed-off-by: Ruben Völl <ruben.voell@grandcentrix.net>
This structure is bad style and not needed. Instead get the surrounding
`struct uart_emul_data` with `CONTAINER_OF()` directly.
Signed-off-by: Ruben Völl <ruben.voell@grandcentrix.net>
uart_emul_fifo_read() didn't regard the size arg, hence if the RX ring
buffer contained more data than the size of the input rx_data buffer
size, this could result in buffer overflow. This becomes more obvious
when configuring device tree property latch-buffer-size > 1.
Signed-off-by: Andreas Anderberg <andreas.anderberg@u-blox.com>
Real UARTs usually write 1 to a few bytes at a time through a
latch buffer. Add latch buffer property to binding for
uart_emul and limit fifo_read and fifo_fill to not exceed the
latch buffer.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Define local thread to emulate different thread priorities.
A UART driver may call back from within a thread with higher
or lower priority than the thread calling the UART API. This
can hide potential concurrency issues, especially if the
thread priorities are the same, or even using the same thread
in case the system work queue.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Previously, the uart_emul device did not support interrupt-driven
receive, which is an unwritten requirement for hooking up a uart to
the Zephyr console driver.
The console is a fairly high-traffic subsystem, and we should be able
to perform more extensive testing on it, aside from maching twister
output against a regular expression. With this change, we can use
the emulation uart within the body of a ZTest.
Testing Done:
```shell
west build -p auto -b qemu_riscv64 -t run tests/drivers/console_switching
...
*** Booting Zephyr OS build zephyr-v3.4.0-4277-gae0d63471be1 ***
Running TESTSUITE console_switching
===================================================================
START - test_read
read "Hello, uart_emul0!" from uart_emul0
read "Hello, uart_emul1!" from uart_emul1
read "Hello, uart_emul0!" from uart_emul0
read "Hello, uart_emul1!" from uart_emul1
PASS - test_read in 0.005 seconds
===================================================================
START - test_write
wrote "Hello, uart_emul0!" to uart_emul0
wrote "Hello, uart_emul1!" to uart_emul1
wrote "Hello, uart_emul0!" to uart_emul0
wrote "Hello, uart_emul1!" to uart_emul1
PASS - test_write in 0.003 seconds
===================================================================
TESTSUITE console_switching succeeded
------ TESTSUITE SUMMARY START ------
SUITE PASS - 100.00% [console_switching]: pass = 2, fail = 0, skip = 0...
- PASS - [console_switching.test_read] duration = 0.005 seconds
- PASS - [console_switching.test_write] duration = 0.003 seconds
------ TESTSUITE SUMMARY END ------
===================================================================
PROJECT EXECUTION SUCCESSFUL
```
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
This adds the CONFIG_UART_USE_RUNTIME_CONFIGURE guard to
disable the API function pointers if the kconfig is not enabled.
Both .configure and .config_get should only be usable if runtime
(re-)configuration of UART is needed.
Ifdef guards are added to drivers previously lacking this guard.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
WenBin Zhang
Pieter De Gendt
Jordan Yates
Ruben Völl
Andreas Anderberg
Bjarki Arge Andreasen
Nick Kraus
Christopher Friedt
Daniel Leung
Gerard Marull-Paretas
Fabian Blatz