Updated driver based on changes done in SDK 25.06.00-pvw2.
Update hal_nxp to include BLE LL and IEEE 802.15.4 PHY NBU
combo firmware for MCXW72 boards.
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
Updated mcxw_get_time function to output its result in nanosecond
resolution and updated code accordingly.
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
OpenThread network discovery was not working.
The radio driver is filtering the beacon packets whereas
this is required for OpenThread.
Allow receiving beacon packets.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
This adds support of ED scanning to cc13xx/cc26xx.
This could be required to select the least busy channel
or to found neighboring networks.
Note:
Although the scanning is working, OpenThread still fails
to discover OpenThread networks.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Add mcxw ieee802154 driver
Fix compliance errors for added files.
Update function names to snake_case style.
Signed-off-by: Andrei Menzopol <andrei.menzopol@nxp.com>
Without this fix I get an MPU fault in samples/net/openthread/shell/
with CONFIG_IEEE802154_DRIVER_LOG_LEVEL_DBG=y.
Related commit: a7224830ce
Signed-off-by: Martin Jäger <martin@libre.solar>
Use the same Kconfig for all drivers to configure if the FCS bytes
(checksum) should be included in the packets passed to L2.
The description is slightly reworded to make clear that it does not
only affect the length, but the packet content itself.
Signed-off-by: Martin Jäger <martin@libre.solar>
The status variable stores the return value of `net_recv_data`, which
is an `int` and may be negative.
Signed-off-by: Martin Jäger <martin@libre.solar>
Commit add `modcarrier` shell command for Openthread diagnostic mode.
Command can transmit modulated carrier out of device for test purposes.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Add Kconfig option `OPENTHREAD_WAKEUP_COORDINATOR` to enable
the Wake-up Coordinator role. Implement API to set Coordinated
Sampled Transmitting sample time and period for a driver that supports
`IEE802154_OPENTHREAD_HW_CST` capability.
The feature is be enabled on with ieee802154_nrf5 driver with option
by setting default value of CONFIG_IEEE802154_NRF5_CST_ENDPOINT.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The new Kconfig option `IEEE802154_NRF5_CST_ENDPOINT` is added.
When it is enabled, then capability `IEE802154_OPENTHREAD_HW_CST`
is supported by the ieee802154_nrf5 driver and allows to set the
CST period and CST expected transmission time point.
This feature is an OpenThread-specific extention to the
ieee802154_nrf5 driver.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Co-authored-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
If the invalid short address (0xfffe) is specified,
configure the Enhanced Ack just for the extended address.
This is needed because Header IEs for Enhanced Ack must be
configured before the short address has been assigned to
the child.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
The ieee802154_nrf5 supports the IEEE802154_SELECTIVE_TXCHANNEL
Kconfig option and advertises the IEEE802154_HW_SELECTIVE_TXCHANNEL
capability.
The ieee802154_nrf5 driver now allows to schedule timed transmission
requests with selective tx channel, that is set at the latest
possible moment. This improves reception performance when the
timed transmissions are requested.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The Kconfig `IEEE802154_SELECTIVE_TXCHANNEL` is added along with
the new capability `IEEE802154_HW_SELECTIVE_TXCHANNEL`.
The new capability of the ieee802154 drivers allows to schedule
CSL transmissions as stated in IEEE 802.15.4-2020 chapter 6.12.2.7
CSL over multiple channels. The benefit of the new API is that
additional call to `ieee802154_radio_api::set_channel()` is not
required. The drivers will switch to the new channel as late as
possible for CSL transmissions thus will not interrupt any reception
that might be in progress until the very late moment when the
transmission actually starts.
This improves reception performance when CSL transmissions are used.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
The mcr20a driver referencing `MCR20Overwrites.h` which is under
`hal/nxp/mcux`.
So, put `depends HAS_MCUX` for clarify the dependency.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Sometime, the radio causes a bus error.
This happens because we cast a struct and access to a member
that doesn't exists in the original struct.
This updates the driver to use the right struct to make the cast safe.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
The following Kconfigs have been deprecated for more than 2
releases, remove them:
- `IEEE802154_CC13XX_CC26XX_SUB_GHZ_RADIO_TX_RETRIES`
- `CONFIG_IEEE802154_2015`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
- If status == PROP_ERROR_RXBUF, that means rx buffer head is not empty.
In case of this, RF_EventRxEntryDone is never triggered and thus we
enter an infinite loop of nothing happening. Due to this, TCP socket
times out.
- To fix this, we need to free rx buffer current head. However, it seems
better to free all the elements that are already finished instead of
just head.
- Before 128354ae17, the buffer was reset
every time drv_rx_start was called. However, that also seems wrong for
a ring buffer. So I am freeing the finished buffers instead.
- Tested on Beagleconnect Freedom.
- Fixes https://github.com/zephyrproject-rtos/zephyr/issues/71191
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Use BLE.ADDR to create unique (to some extent) EUI64
on nRF54H20 in some cases inside the IEEE 802.15.4 driver.
The amount of EUI64-s available in such a way is very limited
(~16 million).
However, currently there does not seem to be another feasible way to
get device identifiers on nRF54H20 (such are kept in SICR, to which the
radio core has no access).
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
When RxOnWhenIdle is set to False, turn the radio off
if no operation is ongoing in order to save power.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The default value of IEEE802154_NRF5_DELAY_TRX_ACC Kconfig option is
based on a symbol that is undefined for nRF54H20. It evaluates as empty,
which leads to compilation errors with very cryptic logs.
This commit assures that a sane value for IEEE802154_NRF5_DELAY_TRX_ACC
is selected at all times, avoiding the compilation errors.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The nRF IEEE 802.15.4 driver might report a received Ack frame with
invalid timestamp, if the timestamp could not have been taken. The upper
layers are not prepared to handle such a case as they expect that for a
received frame, the timestamp is always present and valid.
This commit detects this situation and handles it gracefully by
reporting the transmission as failed as if no Ack was received.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The soc_secure_* function are used by the non-secure application
to access hardware resources which are mapped as secure.
Using these functions for hardware resources mapped as non-secure
is missleading.
We have some soc_secure_* functions which read FICR values.
In nRF91 and nRF53 platforms this made sense since FICR
has hardware fixed mapping as secure.
For nRF54 though the FICR has hardware fixed mapping as non-secure.
This change refactors the soc_secure.h to exclude the functions
which read FICR values from being included when FICR is mapped as
non-secure.
Also updates the hwinfo and ieee802154 drivers to adjust to this change.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
Used RADIO_IRQ number is based on information provided by DT rather
than direct use of RADIO_IRQn.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
- Fix using custom setup function
- Enable pRegOverrideTxStd and pRegOverrideTx20 in
ieee802154_cc13xx_subg_radio_div_setup struct
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
This reverts commit 780b12854c.
"drivers: ieee802154: nrf: cache radio channel"
Implementation affected RCP devices in openthread as MAC layer
does not call `Receive()` functions after transmit is done.
Additionally, after sending a frame to a new channel (for example
while discovery operation), radio switches to RX state immediately
after TX, but continues to listen on old channel for about 5ms,
until MAC layer calls `Receive` operation, forcing to change the
channel.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
- In `set_vendor_ie_header_lm`, case when
`link_metrics_data_len == 0` has been ignored.
This commit fixes that by setting `header_ie->length = 0`
before returning.
- current implementation of enh ACK header IE returns
`-ENOTSUP` when `ack_ie.header_ie == NULL` or
`ack_ie.header_ie->length == 0`. This commit fixes that by
refactoring checks in `nrf5_configure`.
Co-authored-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
The current implementation implicitly assumes that if the device is
configured to have the capability of acting as a CSL endpoint then in
case a delayed reception with matching ID finishes with a timeout no
action is needed. This assumption is correct when RxOnWhenIdle mode is
disabled because the transition to sleep is done automatically by the
driver below. However, it's wrong when RxOnWhenIdle is enabled. This
commit fixes that case by adding a call to event handler that notifies
the higher layer about the event and allows it to transition to RxOff if
needed.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This change marks each instance of the 'api' as 'static const'.
The rationale is that 'api' is used for declaring internal
module interfaces and is not intended to be modified at runtime.
By using 'static const', we ensure immutability, leading to usage of only
.rodata and a reduction in the .data area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Cache configured radio channel and apply them only when a relevant
radio task is requested.
This allows to configure the channel in the transmit metadata, thus
avoiding unneeded `nrf_802154` API calls in some scenarios.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Remove `IEEE802154_SELECTIVE_TXPOWER` option.
Cache the tx power value in nRF5 driver and make use of it on each
operation.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
IEEE 802.15.4-2020 defines four possible values for Key Identifier Mode
field of the Auxiliary Security Header. The current ieee802154 driver
API only supports two of them: b00 and b01. This commit adds support for
the two remaining Key Identifier Mode values. It's done by replacing a
field that can only hold Key Index into a field that can holds a pointer
to the entire Key Identifier field.
See IEEE 802.15.4-2020, sections 9.4.2.3 and 9.4.4 for further reference.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
When CONFIG_IEEE802154_RAW_MODE is set there is no network interface
that could provide pointer to the device the interface is running on top
of. The current implementation of nRF5 ieee802154 driver implicitly
assumes that such an interface is always present, which leads to crashes
when raw mode is enabled.
This commit adds support for IEEE802154_RAW_MODE in nRF5 ieee802154
driver by latching pointer to the ieee802154 device on initialization if
needed so that it doesn't have to be retrieved using the network
interface in run-time.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Martin Jäger
Cristian Bulacu
Vincent van der Locht
Andrei Menzopol
Alexandre Bailon
Damian Krolik
Benjamin Cabé
Tom Hughes
Pieter De Gendt
Przemyslaw Bida
Andrzej Kuros
Florian Grandel
TOKITA Hiroshi
Jordan Yates
Yong Cong Sin
Ayush Singh
Piotr Koziar
Eduardo Montoya
Jędrzej Ciupis
Fin Maaß
Georgios Vasilakis
Tomasz Bursztyka
Maciej Baczmanski
Gerard Marull-Paretas
Pisit Sawangvonganan