Use recently added SoCs functions to request access to SoC backup
domain resources These function use a reference counter to track these
request and ensure the resources are accessible as long as at least a
consumer requires access.
Fixes issue 90942.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
This commit workarounds the BBRAM status register write issue in npcx4:
A write operation to the BKUP_STS register might disable write to all
the Battery-Backed RAM (BBRM). The workaround is to perform a fake read
from the BKUP_STS register after every write to this register.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Use shell_device_get_binding() instead of device_get_binding() so that
we get the device based on its name and in addition by its label.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
Bits in the BBRAM status register (BKUP_STS) are write-1-to-clear bits.
The current driver writes 0 to clear those bits, which is incorrect.
Fix it in this commit.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
On devices where the backup memory is part of the TAMP peripheral, the
Backup Domain Protection prevents write to the backup registers. This
fix disables the protection before writing registers and re-enables it
afterwards.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Clear the whole 192 bytes of bbram, before writing the magic value to it.
test pass "west twister -cviG -T tests/drivers/bbram/".
Fixes#69119
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
Driver BBRAM for STM32 had a compilation error: "unknown type name
'RTC_TypeDef'" due to missing include file.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
On STM32WL, the backup memory is defined as part of the TAMP peripheral.
This seems to be a deviation from the stm32 family where this memory is
defined as part of the RTC.
The STM32WL reference manual shows that tamp_pclk is connected to
rtc_pclk. This means that the clock required to run the TAMP peripheral
is the same as the RTC's. A quick port of BBRAM on STM32WL is achieved
by instanciating the bbram device as a child of the RTC and by modifying
the address offset to the first backup register from the rtc base
address.
Signed-off-by: Adrien Bruant <adrien.bruant@aalberts-hfc.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
STM32 BBRAM depends on RTC to work. This changes STM32 RTC init stage to
PRE_KERNEL_1 to allow RTC driver to initialize before BBRAM driver.
Some adjustments are made so that kernel API is not used during the init
procedure.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
STM32 battery-backed RAM is organized in 4 byte registers. Number of
registers can vary between models from 5 to 32 registers.
Usually, the registers are part of RTC. On some variants they are part
of tamper module. On STM32F1 the registers are in separate module. For
now, only backup registers from RTC are supported.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
1. Rename DT_COMPAT_ST_BBRAM_IT8XXX2 to COMAPT_ITE_IT8XXX2_BBRAM
2. The default configuration "$( )" should be a parentheses instead
of curly brackets. The BBRAM for it8xxx2 can be driven after
correcting.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
BBRAM content should be cleared when boot from cutoff. Compare magic
number to decide whether to clear entire BBRAM.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Note that the it8xxx2 does not support a status register so that
functionality is omitted.
This change also adds driver tests that build both the npcx and it8xxx2
drivers.
Signed-off-by: Yuval Peress <peress@chromium.org>
There was a typo that snuck into the bbram driver for npcx.
Fix the driver and update the Kconfig to automatically include the
driver if the compatible string exists in the dts. This ensures that
the driver is built when building the npcx evbs.
Signed-off-by: Yuval Peress <peress@chromium.org>
Etienne Carriere
Jun Lin
Elmo Lan
Yishai Jaffe
Pieter De Gendt
Aurelien Jarno
Yong Cong Sin
Ruibin Chang
Guillaume Gautier
Yuval Peress
Adrien Bruant
Anas Nashif
Johan Lafon
Laczen JMS
Gerard Marull-Paretas
Henrik Brix Andersen
Jamie McCrae
Patryk Duda
Keith Short
Kumar Gala
Jay Vasanth
Wealian Liao
Tim Lin
Yuval Peress