Add it515xx analog to digital converter driver which supports 8 channels
ch0 ~ ch7 and 12-bit resolution.
Signed-off-by: Yunshao Chiang <Yunshao.Chiang@ite.com.tw>
The AD4114 is a low power, low noise, 24-bit, sigma-delta ADC.
This driver allows to use it with the Zephyr ADC API. It uses
the continuous acquisition ADC feature.
This ADC allows many configutations, but this driver uses it as the
most generic way :
- each can channel can be enable or disable using the device
tree configuration
- configure two setups (one for unipolar inputs, one for bipolar inputs)
- use an external clock
Signed-off-by: Pierrick Curt <pierrickcurt@gmail.com>
Rename "nxp,kinetis-adc12" compatible to "nxp,adc12" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Rename ad5592 files in dts, driver and include to ad559x and add support
for I2C bus which is required for AD5593.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add all available instances of the ADC series
MAX11102-MAX11117 to the ADC shell.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Previously, only a single type of ADCs was always available
in the ADC shell. This change enables the usage of the ADC
shell for different ADC types at the same time.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The adc-shell uses a hardcoded list of defines to check whether it should
throw a compile-time error. The ADS1119 and ADS1112 driver both support
the APIs needed by the shell, so this commit enables support for them in
the hardcoded support list.
Signed-off-by: Jordan Montgomery <jordan.montgomery@getcruise.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Microchip XEC ADC and ADC V2 driver were merged into one
That PR did not change the ADC API test and ADC shell resulting
in twister build failures. Fixed both ADC API test and ADC shell.
Signed-off-by: scott worley <scott.worley@microchip.com>
Add support for setting the help description for each entry in a dictionary
command. Currently the syntax string alone may not provide sufficient
description of its entry. This commit also helps keep the help messages
consistent with existing style.
Signed-off-by: Xinyang Tan <xinyang.tan@delve.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add ADC driver version 2 for MEC172x using new in-tree headers
and device tree properties. Update the ADC shell for the new driver.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
ADC emulator is designed to be used in tests on native_posix board. It
supports 1-16 bit resolution range and all GAINs from enum adc_gain.
Reference voltages and number of emulated channels are set through dts.
Using special API from drivers/adc/adc_emul.h it is possible to set
constant voltage value returned by given ADC channel or set custom
function which allows to simulate complex output.
Also reference voltages can be changed in runtime using the API.
The CL also includes:
- Add adc definitions of ADC emulator in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
- Add test for ADC emulator API in tests/drivers/adc/adc_emul/
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
This commit is about the it8xxx2 analog to digital converter
driver. Support 8 channels ch0~ch7 and 10-bit resolution.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
NPCX7 includes a 10-bit resolution Analog-to-Digital Converter (ADC). Up
to 10 voltage inputs can be measured and a internal voltage reference
(VREF), 2.816V (typical) is used for measurement. It can be triggered
automatically in Autoscan mode. Each input channel is assigned a
separate result register, which is updated at the end of the conversion.
The CL also includes:
— Add npcx adc device tree declarations.
— Zephyr adc api implementation.
— Add adc definitions of npcx7 in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
ADC shell commands can be only executed on the property label
existing in the device tree. It is realized by the dynamic subcommand
returning existing ADC Label.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The channel command has been extended with subcommands: id, positive,
and negetive. Some boards require positive input configuration before
measurement can be started.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Use dedicated shell macros so argument count can be validated before
the command handler is executed. This change simplifies the command
handlers implementation inside the adc_shell file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Changed gain and reference commands to dictionary commands.
This change removes an obsolete look-up table (string <-> value)
for gain and reference commands.
Now, each modification of gain or reference value will require only
a dictionary command update.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Suppress -Wchar-subscripts warnings when building with Newlib, by
casting isdigit() parameter to unsigned char.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Had an extra comma between macro and macro usage that casued the
following compile error:
adc_shell.c:477:22: error: expected expression before ',' token
Easy fix to remove trailing comma in ADC_SHELL_COMMAND
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make drivers multi-instance wherever possible using DT_INST_FOREACH.
This allows removing DT_HAS_DRV_INST in favor of making drivers just
do the right thing regardless of how many instances there are.
There are a few exceptions:
- SoC drivers which use CMake input files (like i2c_dw.c) or otherwise
would require more time to convert than I have at the moment. For the
sake of expediency, just inline the DT_HAS_DRV_INST expansion for
now in these cases.
- SoC drivers which are explicitly single-instance (like the nRF SAADC
driver). Again for the sake of expediency, drop a BUILD_ASSERT in
those cases to make sure the assumption that all supported SoCs have
at most one available instance is valid, failing fast otherwise.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace having dts_fixup.h files define DT_ADC_{0..2}_NAME with using
the new devicetree.h macros. We test to see what driver compat is
enabled via DT_HAS_COMPAT and set DT_DRV_COMPAT to that compat. Than we
can utilize the DT_INST_LABEL() macro to extract the name of the device.
We also replace the Kconfig ADC_{0..2} symbols with DT_HAS_DRV_INST.
This will allow us to remove those Kconfig symbols as this was the only
usage.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The adc shell makes it possible to configure ADC_0 and ADC_1 for testing
purposes. It includes helpful printouts if the number of arguments is
wrong.
Signed-off-by: Nicolai Glud <nigd@prevas.dk>
Yunshao Chiang
Pierrick Curt
Bart De Vos
Benjamin Bigler
Manuel Argüelles
Jeppe Odgaard
Henrik Brix Andersen
Bartosz Bilas
Nick Ward
Benedikt Schmidt
Cong Nguyen Huu
Jordan Montgomery
Antonio Tessarolo
Gerard Marull-Paretas
Kumar Gala
scott worley
Pieter De Gendt
Marek Matej
Xinyang Tan
TOKITA Hiroshi
Andrei Auchynnikau
Tomasz Michalec
Tim Lin
Pavlo Hamov
Mulin Chao
Jakub Rzeszutko
Tomasz Bursztyka
Marcin Niestroj
Kumar Gala
Martí Bolívar
Peter Bigot
Nicolai Glud