the device_state need realocate when boot as second core.
as the relocation does not know the alignment, this could
be a case that the next data is mis-place after relocation.
fix this by add a alignment in device_state section.
still need revert aec0355380
reported in #86871fixes: #82841
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add Kconfig option to dump only a portion of stack from the
current stack pointer to the stack end. This is enough to
let gdb reconstruct the stack trace and can significantly
reduce the dump size. This is crucial if the core dump needs
to be sent over radio.
Additionally, add another option to set the limit for the
dumped stack portion.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Add support for .mot file flash using west flash command
The RX build output .mot as binary file to flash into
board
Signed-off-by: Phi Tran <phi.tran.jg@bp.renesas.com>
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
GCC and Clang support the undefined behavior sanitizer in any
configuration, the only restriction is that if you want to get nice
messages printed, then you need the ubsan library routines which are only
present for posix architecture or when using picolibc.
This patch adds three new compiler properties:
* sanitizer_undefined. Enables the undefined behavior sanitizer.
* sanitizer_undefined_library. Calls ubsan library routines on fault.
* sanitizer_undefined_trap. Invokes __builtin_trap() on fault.
Overhead for using the trapping sanitizer is fairly low and should be
considered for use in CI once all of the undefined behavior faults in
Zephyr are fixed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Move SRAM_VECTOR_TABLE symbol from general Kconfig to Arch Kconfig
because it depends on the architecture possibility to relocate the
vector table.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
This is currently selected by the arch, but some devices (in paticular
xtensa ones which have configurable interrupt setups) might not
actually be able to effect an irq_offload() from within an ISR even
though we have code for it.
Make this a default and not a select so that lower layers can override
the setting.
Signed-off-by: Andy Ross <andyross@google.com>
Add the following arch-specific APIs:
- arch_curr_thread()
- arch_set_curr_thread()
which allow SMP architectures to implement a faster "get current
thread pointer" than the default provided by the kernel. The 'set'
function is required for the 'get' to work, more on that later.
When `CONFIG_ARCH_HAS_CUSTOM_CURRENT_IMPL` is selected, calls to
`_current` & `k_sched_current_thread_query()` will be redirected to
`arch_curr_thread()`, which ideally should translate into a single
instruction read, avoiding the current
"lock > read CPU > read current thread > unlock" path in SMP
architectures and thus greatly improves the read performance.
However, since the kernel relies on a copy of the "current thread"s on
every CPU for certain operations (i.e. to compare the priority of the
currently scheduled thread on another CPU to determine if IPI should be
sent), we can't eliminate the copy of "current thread" (`current`) from
the `struct _cpu` and therefore the kernel now has to invoke
`arch_set_curr_thread()` in addition to what it has been doing. This
means that it will take slightly longer (most likely one instruction
write) to change the current thread pointer on the current
CPU.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This adds a new kconfig for eviction algorithm which needs page
tracking. When enabled, k_mem_paging_eviction_add()/_remove()
and k_mem_paging_eviction_accessed() must be implemented.
If an algorithm does not do page tracking, there is no need to
implement these functions, and no need for the kernel MMU code
to call into empty functions. This should save a few function
calls and some CPU cycles.
Note that arm64 unconditionally calls those functions so
forces CONFIG_EVICTION_TRACKING to be enabled there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to call into architecture code to dump
the privileged stack for user threads.
The weak implementation is simply there as a stub until
all architectures have implemented the associated function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
`CONFIG_MP_NUM_CPUS` has been deprecated for more than 2
releases, it's time to remove it.
Updated all usage of `CONFIG_MP_NUM_CPUS` to
`CONFIG_MP_MAX_NUM_CPUS`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add the possibility to disable fault handling in spurious
interrupt handler on RISCs and replacce it with an infinite loop.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new arch_thread_priv_stack_space_get() interface for
each architecture to report privileged stack space usage. Each
architecture will need to implement this function as each arch
has their own way of defining privileged stacks.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This provides memory mappings with the ability to be initialized in their
paged-out state and be paged in on demand. This is especially nice for
anonymous memory mappings as they no longer have to allocate all memory
at mem_map time. This also allows for file mappings to be implemented by
simply providing backing store location tokens.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit introduces a new ARCH_STACKWALK Kconfig which
determines if the `arch_stack_walk()` is available should the
arch supports it.
Starting from RISCV, this will be able to converge the exception
stack trace implementation & stack walking features. Existing
exception stack trace implementation will be updated later.
Eventually we will end up with the following:
1. If an arch implements `arch_stack_walk()`
`ARCH_HAS_STACKWALK` should be selected.
2. If the above is enabled, `ARCH_SUPPORTS_STACKWALK` indicates
if the dependencies are met for arch to enable stack walking.
This Kconfig replaces `<arch>_EXCEPTION_STACK_TRACE`
2. If the above is enabled, then, `ARCH_STACKWALK` determines
if `arch_stack_walk()` should be compiled.
3. `EXCEPTION_STACK_TRACE` should build on top of the
`ARCH_STACKWALK`, stack traces will be printed when it
is enabled.
4. `ARCH_STACKWALK_MAX_FRAMES` will be removed as it is
replaced by `ARCH_STACKWALK_MAX_FRAMES`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This will update the posix thread names to match
the zephyr thread names.
This will simplify debugging as the debugger will
recognize the thread names.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
custom arch_cpu_idle and arch_cpu_atomic_idle implementation was done
differently on different architectures. riscv implemented those as weak
symbols, xtensa used a kconfig and all other architectures did not
really care, but this was a global kconfig that should apply to all
architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add new config, ARCH_SUPPORTS_COREDUMP_THREADS, and
only enable it for ARM CORTEX M where the gdb server
can support it.
Signed-off-by: Mark Holden <mholden@meta.com>
Check that the stack frame pointer is valid before dumping
any registers while handling exceptions. If the pointer is
invalid, anything it points to will probably be also be
invalid. Accessing them may result in another access
violation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Kconfig, .ld and comments fixing
Fixed address of UART1, WDT and RTC timer disabled by default
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Many boards/SoCs in-tree do this:
if !XIP
config FLASH_SIZE
default 0
config FLASH_BASE_ADDRESS
default 0
endif
And many other boards are missing this configuration (e.g. stm32 series).
Making this the default helps get non-XIP just working
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Created the `arch_stack_walk()` function out from the original
`z_riscv_unwind_stack()`, it's been updated to support
unwinding any thread.
Updated the stack_unwind test case accordingly.
Increased the delay in `test_fatal_on_smp`, to wait
for the the fatal thread to be terminated, as stacktrace can
take a bit more time.
Doubled the kernel/smp testcase timeout from 60 (default) to
120s, as some of the tests can take a little bit more than 60s
to finish.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
An architecture can indicate that it has an implementation for
the `arch_stack_walk()` function by selecting
`ARCH_HAS_STACKWALK`.
Set the default value of `EXCEPTION_STACK_TRACE_MAX_FRAMES` to
`ARCH_STACKWALK_MAX_FRAMES` if the latter is available.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Also any demand paging and page frame related bits are
renamed.
This is part of a series to move memory management related
stuff out of the Z_ namespace into its own namespace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Platforms that support IPIs allow them to be broadcast via the
new arch_sched_broadcast_ipi() routine (replacing arch_sched_ipi()).
Those that also allow IPIs to be directed to specific CPUs may
use arch_sched_directed_ipi() to do so.
As the kernel has the capability to track which CPUs may need an IPI
(see CONFIG_IPI_OPTIMIZE), this commit updates the signalling of
tracked IPIs to use the directed version if supported; otherwise
they continue to use the broadcast version.
Platforms that allow directed IPIs may see a significant reduction
in the number of IPI related ISRs when CONFIG_IPI_OPTIMIZE is
enabled and the number of CPUs increases. These platforms can be
identified by the Kconfig option CONFIG_ARCH_HAS_DIRECTED_IPIS.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Replace the global CSTD property with the CSTD kconfig option to select
at least C11 standard.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This adds the necessary bits to enable memory mapping thread
stacks on both x86 and x86_64. Note that currently these do
not support multi level mappings (e.g. demand paging and
running in virtual address space: qemu_x86/atom/virt board)
as the mapped stacks require actual physical addresses.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This introduces support for memory mapped thread stacks,
where each thread stack is mapped into virtual memory
address space with two guard pages to catch
under-/over-flowing the stack. This is just on the kernel
side. Additional architecture code is required to fully
support this feature.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fin Maaß
Tom Hughes
Al Semjonovs
Hake Huang
Anas Nashif
Damian Krolik
Phi Tran
Duy Nguyen
Keith Packard
Martin Hoff
Peter Mitsis
Jamie McCrae
Jordan Yates
Carles Cufi
Andy Ross
Yong Cong Sin
Daniel Leung
Nicolas Pitre
Tavish Naruka
Magdalena Pastula
Marcio Ribeiro
Rubin Gerritsen
Mark Holden
Raffael Rostagno
Grant Ramsay
Pieter De Gendt