Fixes a bug where more than one thread trying to access
different PWM devices can cause erroneous behavior.
Co-authored-by: James Goppert <james.goppert@gmail.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Fix `PWM_SetupPwm` function being called with `numOfChnls`
argument equal to 2, when in fact only one channel is being set up.
Also add 'U' suffix to `pwmFreq_Hz` unsigned integer argument in
the function call.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Write PWM match registers directly instead of using the frequency and
duty cycle fields of the MCUX HAL driver. This allows the driver to take
full advantage of the resolution supported by the FlexPWM when setting
duty cycle and carrier frequency.
Fixes#59080
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The HAL function PWM_SetupPwm does the inverse division to get the
number of pulses from the frequency.
In the case of a prescaler of 1 and a period of UINT16_MAX cycles
this would result in an uint16_t overflow.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
HAL API changes in ethernet and pwm
SoC RT595 power management code change
west.yml update
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Replace the hardcoded kPWM_Prescale_Divide_128
driver prescaler with the ones defined in the dtsi file
that allow overriding them by the user.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Register was wrongly casted to (void *) in one case, and unnecessarily
casted in another case.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The variable indicating the PWM channel is now names "channel" instead
of "pwm", adjust all drivers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The API spec states that calling pin_set() with period set to 0 is
equivalent to set the PWM channel to an inactive level. Some drivers
treat this input as invalid (-EINVAL), however, it's an unsupported
feature. Maybe it's due to copy&paste effect? This changes error message
to be clear and changes return value to -ENOTSUP for this case.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The API call checks for this condition before calling the pin_set driver
OP call, so drivers don't have to do this check now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace usages of DT_PARENT(DT_DRV_INST(idx)) with more idiomatic
DT_INST_PARENT(idx).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MCUX PWM driver used hardcoded clock source. update driver to use clock
bindings to determine PWM peripheral clock frequency.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Convert pwm drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage. We also remove dts_fixup.h defines that
are no longer needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add support for requesting an inverted PWM pulse (active-low) when
setting up the period and pulse width of a PWM pin. This is useful
when driving external, active-low circuitry (e.g. an LED) with a PWM
signal.
All in-tree PWM drivers is updated to match the new API signature, but
no driver support for inverted PWM signals is added yet.
All in-tree PWM consumers are updated to pass a flags value of 0
(0 meaning default, which is normal PWM polarity).
Fixes#21384.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Yishai Jaffe
Benjamin Perseghetti
Mahesh Mahadevan
Gustavo Silva
Daniel DeGrasse
Pieter De Gendt
Yves Vandervennet
Grixa Yrev
Bartosz Bilas
Nick Ward
Henrik Brix Andersen
Gerard Marull-Paretas
Kumar Gala
Tomasz Bursztyka
Martí Bolívar
Peter Bigot
Loic Poulain