drivers: rcar: Select CONFIG_PINCTRL

Select PINCTRL for drivers: pwm, sdhc, serial Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
8 months ago · d41ce536c5
3 changed files with 3 additions and 0 deletions
--- a/drivers/pwm/Kconfig.rcar
+++ b/drivers/pwm/Kconfig.rcar
@ -8,5 +8,6 @@ config PWM_RCAR
				@@ -8,5 +8,6 @@ config PWM_RCAR
 	default y
 	depends on SOC_FAMILY_RENESAS_RCAR
 	depends on DT_HAS_RENESAS_PWM_RCAR_ENABLED
+	select PINCTRL
 	help
 	  Enable Renesas R-Car PWM Driver.
--- a/drivers/sdhc/Kconfig.rcar
+++ b/drivers/sdhc/Kconfig.rcar
@ -8,6 +8,7 @@ config RCAR_MMC
				@@ -8,6 +8,7 @@ config RCAR_MMC
 	select SDHC_SUPPORTS_NATIVE_MODE
 	select REGULATOR
 	select GPIO
+	select PINCTRL
 	select SDHC_SUPPORTS_UHS if SDMMC_STACK
 	help
 	  Renesas Rcar MMC driver.
--- a/drivers/serial/Kconfig.rcar
+++ b/drivers/serial/Kconfig.rcar
@ -9,5 +9,6 @@ config UART_RCAR
				@@ -9,5 +9,6 @@ config UART_RCAR
 	depends on DT_HAS_RENESAS_RCAR_SCIF_ENABLED || DT_HAS_RENESAS_RCAR_HSCIF_ENABLED
 	select SERIAL_HAS_DRIVER
 	select SERIAL_SUPPORT_INTERRUPT
+	select PINCTRL
 	help
 	  Enable Renesas R-Car UART Driver.