diff --git a/cmake/mcuboot.cmake b/cmake/mcuboot.cmake
index e9cd88e2f9a..d2fcf68e889 100644
--- a/cmake/mcuboot.cmake
+++ b/cmake/mcuboot.cmake
@@ -95,7 +95,8 @@ function(zephyr_mcuboot_tasks)
 
   # If single slot mode, or if in firmware updater mode and this is the firmware updater image,
   # use slot 0 information
-  if(NOT CONFIG_MCUBOOT_BOOTLOADER_MODE_SINGLE_APP AND (NOT CONFIG_MCUBOOT_BOOTLOADER_MODE_FIRMWARE_UPDATER OR CONFIG_MCUBOOT_APPLICATION_FIRMWARE_UPDATER))
+  if(NOT CONFIG_MCUBOOT_BOOTLOADER_MODE_SINGLE_APP AND (NOT CONFIG_MCUBOOT_BOOTLOADER_MODE_FIRMWARE_UPDATER OR CONFIG_MCUBOOT_APPLICATION_FIRMWARE_UPDATER)
+      AND NOT CONFIG_MCUBOOT_BOOTLOADER_MODE_SINGLE_APP_RAM_LOAD)
     # Slot 1 size is used instead of slot 0 size
     set(slot_size)
     dt_nodelabel(slot1_flash NODELABEL "slot1_partition" REQUIRED)
@@ -138,6 +139,15 @@ function(zephyr_mcuboot_tasks)
     set(imgtool_args --align 1 --load-addr ${chosen_ram_address} ${imgtool_args})
     set(imgtool_args_alt_slot ${imgtool_args} --hex-addr ${slot1_partition_address})
     set(imgtool_args ${imgtool_args} --hex-addr ${slot0_partition_address})
+  elseif(CONFIG_MCUBOOT_BOOTLOADER_MODE_SINGLE_APP_RAM_LOAD)
+    dt_chosen(ram_load_dev PROPERTY "mcuboot,ram-load-dev")
+    if(DEFINED ram_load_dev)
+      dt_reg_addr(load_address PATH ${ram_load_dev})
+    else()
+      dt_chosen(chosen_ram PROPERTY "zephyr,sram")
+      dt_reg_addr(load_address PATH ${chosen_ram})
+    endif()
+    set(imgtool_args --align 1 --load-addr ${load_address} ${imgtool_args})
   else()
     set(imgtool_args --align ${write_block_size} ${imgtool_args})
   endif()
diff --git a/doc/build/dts/api/api.rst b/doc/build/dts/api/api.rst
index 5ad68f108ce..c8c3c0563a9 100644
--- a/doc/build/dts/api/api.rst
+++ b/doc/build/dts/api/api.rst
@@ -462,3 +462,8 @@ device.
        WS2812 GPIO driver
    * - zephyr,touch
      - touchscreen controller device node.
+   * - mcuboot,ram-load-dev
+     - When a Zephyr application is built to be loaded to RAM by MCUboot, with
+       :kconfig:option:`CONFIG_MCUBOOT_BOOTLOADER_MODE_SINGLE_APP_RAM_LOAD`,
+       this property is used to tell MCUboot the load address of the image, which
+       will be the ``reg`` of the chosen node.
diff --git a/modules/Kconfig.mcuboot b/modules/Kconfig.mcuboot
index 73a6346f89b..2c4dbfa930d 100644
--- a/modules/Kconfig.mcuboot
+++ b/modules/Kconfig.mcuboot
@@ -254,6 +254,21 @@ config MCUBOOT_BOOTLOADER_MODE_FIRMWARE_UPDATER
 	  a dedicated firmware updater application used to update the slot0_partition
 	  application.
 
+config MCUBOOT_BOOTLOADER_MODE_SINGLE_APP_RAM_LOAD
+	bool "MCUboot has been configured in single app RAM load mode"
+	select MCUBOOT_BOOTLOADER_MODE_HAS_NO_DOWNGRADE
+	select MCUBOOT_BOOTLOADER_NO_DOWNGRADE
+	help
+	  MCUboot can load the image to RAM from an arbitrary location. In this mode,
+	  MCUboot will copy the image to RAM and begin execution from there. The image
+	  must be linked to execute from RAM, the address that it is copied to is
+	  specified using the load-addr argument when running imgtool.
+	  Note that while not used directly, a slot0_partition must be defined in the
+	  DT, as it is used to get information about size of the image to be loaded.
+	  This option automatically selects MCUBOOT_BOOTLOADER_NO_DOWNGRADE as it is
+	  not possible to swap back to older version of the application. In fact, none
+	  of the swap operations are supported in this mode.
+
 endchoice # MCUBOOT_BOOTLOADER_MODE
 
 config MCUBOOT_BOOTLOADER_MODE_HAS_NO_DOWNGRADE