soc: atmel: sam0: Port to HWMv2

Port all Atmel SAM0 SoCs to HWMv2.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>

soc/atmel/sam0/CMakeLists.txt

@@ -1,7 +1,10 @@
 # Makefile - Atmel SAM0 MCU family
 #
 # Copyright (c) 2017 Google LLC.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 zephyr_include_directories(${ZEPHYR_BASE}/drivers)
+
 add_subdirectory(common)
+add_subdirectory(${SOC_SERIES})

soc/atmel/sam0/Kconfig

@@ -0,0 +1,16 @@
+# Atmel SAM0 MCU family configuration options
+
+# Copyright (c) 2017 Google LLC.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_FAMILY_SAM0
+	select ASF
+	select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE
+
+if SOC_FAMILY_SAM0
+
+rsource "common/Kconfig.sam*"
+rsource "*/Kconfig"
+
+endif # SOC_FAMILY_SAM0

soc/atmel/sam0/Kconfig.defconfig

@@ -0,0 +1,30 @@
+# Atmel SAM0 MCU family default configuration options
+
+# Copyright (c) 2017 Google LLC.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_FAMILY_SAM0
+
+rsource "*/Kconfig.defconfig"
+
+config GPIO
+	default y
+
+config HWINFO_SAM0
+	default HWINFO
+
+config PINCTRL
+	default y
+
+config SYS_CLOCK_HW_CYCLES_PER_SEC
+	default $(dt_node_int_prop_int,/cpus/cpu@0,clock-frequency)
+
+if USB_DEVICE_DRIVER
+
+config HEAP_MEM_POOL_ADD_SIZE_SOC
+	def_int 1024
+
+endif # USB_DEVICE_DRIVER
+
+endif # SOC_FAMILY_SAM0

soc/atmel/sam0/Kconfig.soc

@@ -0,0 +1,21 @@
+# Copyright (c) 2017 Google LLC.
+# Copyright (c) 2022-2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_FAMILY_SAM0
+	bool
+
+config SOC_FAMILY
+	default "atmel_sam0" if SOC_FAMILY_SAM0
+
+config SOC_SERIES_REVISION_N
+	bool
+	depends on SOC_FAMILY_SAM0
+
+config SOC_SERIES_REVISION
+	string
+	default "n" if SOC_SERIES_REVISION_N
+	default ""
+	depends on SOC_FAMILY_SAM0
+
+rsource "*/Kconfig.soc"

soc/atmel/sam0/common/Kconfig.samd5x

@@ -12,10 +12,17 @@ config SOC_ATMEL_SAMD5X_XOSC32K
 
 choice
 	prompt "Main clock source"
+	default SOC_ATMEL_SAMD5X_DEFAULT_AS_MAIN
 	help
 	  Selects the clock that the main clocks, such as the CPU
 	  clock and AHB clock, will be derived from.
 
+config SOC_ATMEL_SAMD5X_DEFAULT_AS_MAIN
+	bool "DEFAULT"
+	help
+	  This choice will leave all clocks to their current state.
+	  This can be the default reset state or a state set by a bootloader.
+
 config SOC_ATMEL_SAMD5X_XOSC32K_AS_MAIN
 	depends on SOC_ATMEL_SAMD5X_XOSC32K
 	bool "XOSC32K"

soc/atmel/sam0/common/Kconfig.saml2x

@@ -71,8 +71,6 @@ config SOC_ATMEL_SAML_OSC16M_AS_MAIN
 
 endchoice
 
-endif # SOC_SERIES_SAML21 || SOC_SERIES_SAMR34 || SOC_SERIES_SAMR35
-
 config SOC_ATMEL_SAMR3X_RADIO_OFF_SETUP
 	bool "Configure LoRa radio pins if not in use"
 	default y if !LORA
@@ -84,3 +82,5 @@ config SOC_ATMEL_SAMR3X_RADIO_OFF_SETUP
 	  further reduce power consumption, radio can be kept in reset state by
 	  keeping nRST pin low. When enabling this option, both CS and nRST will
 	  be configured high and low, respectively.
+
+endif # SOC_SERIES_SAML21 || SOC_SERIES_SAMR34 || SOC_SERIES_SAMR35

soc/atmel/sam0/samc20/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/samc20/Kconfig

@@ -1,17 +1,12 @@
 # Atmel SAMC20 MCU series
 
 # Copyright (c) 2022 Kamil Serwus
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAMC20
-	bool "Atmel SAMC20 MCU"
 	select ARM
 	select CPU_CORTEX_M0PLUS
 	select CPU_CORTEX_M_HAS_SYSTICK
 	select CPU_CORTEX_M_HAS_VTOR
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAMC20 Cortex-M0+ microcontrollers.

soc/atmel/sam0/samc20/Kconfig.defconfig

@@ -0,0 +1,12 @@
+# Atmel SAMC20 MCU series configuration options
+
+# Copyright (c) 2022 Kamil Serwus
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAMC20
+
+config NUM_IRQS
+	default 32
+
+endif # SOC_SERIES_SAMC20

soc/atmel/sam0/samc20/Kconfig.soc

@@ -0,0 +1,98 @@
+# Atmel SAMC20 MCU series
+
+# Copyright (c) 2022 Kamil Serwus
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAMC20
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAMC20 Cortex-M0+ microcontrollers.
+
+config SOC_SERIES
+	default "samc20" if SOC_SERIES_SAMC20
+
+config SOC_SAMC20E15A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20E16A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20E17A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20E18A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20G15A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20G16A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20G17A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20G18A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20J15A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20J16A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20J17A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20J18A
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20J17AU
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20J18AU
+	bool
+	select SOC_SERIES_SAMC20
+
+config SOC_SAMC20N17A
+	bool
+	select SOC_SERIES_SAMC20
+	select SOC_SERIES_REVISION_N
+
+config SOC_SAMC20N18A
+	bool
+	select SOC_SERIES_SAMC20
+	select SOC_SERIES_REVISION_N
+
+config SOC
+	default "samc20e15a" if SOC_SAMC20E15A
+	default "samc20e16a" if SOC_SAMC20E16A
+	default "samc20e17a" if SOC_SAMC20E17A
+	default "samc20e18a" if SOC_SAMC20E18A
+	default "samc20g15a" if SOC_SAMC20G15A
+	default "samc20g16a" if SOC_SAMC20G16A
+	default "samc20g17a" if SOC_SAMC20G17A
+	default "samc20g18a" if SOC_SAMC20G18A
+	default "samc20j15a" if SOC_SAMC20J15A
+	default "samc20j16a" if SOC_SAMC20J16A
+	default "samc20j17a" if SOC_SAMC20J17A
+	default "samc20j18a" if SOC_SAMC20J18A
+	default "samc20j17au" if SOC_SAMC20J17AU
+	default "samc20j18au" if SOC_SAMC20J18AU
+	default "samc20n17a" if SOC_SAMC20N17A
+	default "samc20n18a" if SOC_SAMC20N18A

soc/atmel/sam0/samc20/soc.h

@@ -1,11 +1,12 @@
 /*
  * Copyright (c) 2022 Kamil Serwus
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAMC_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAMC20_SOC_H_
-#define _ATMEL_SAMC_SOC_H_
+#define _SOC_ATMEL_SAM0_SAMC20_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -13,38 +14,37 @@
 
 #include <zephyr/types.h>
 
-
+#if defined(CONFIG_SOC_SAMC20E15A)
-#if defined(CONFIG_SOC_PART_NUMBER_SAMC20E15A)
 #include <samc20e15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20E16A)
+#elif defined(CONFIG_SOC_SAMC20E16A)
 #include <samc20e16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20E17A)
+#elif defined(CONFIG_SOC_SAMC20E17A)
 #include <samc20e17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20E18A)
+#elif defined(CONFIG_SOC_SAMC20E18A)
 #include <samc20e18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20G15A)
+#elif defined(CONFIG_SOC_SAMC20G15A)
 #include <samc20g15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20G16A)
+#elif defined(CONFIG_SOC_SAMC20G16A)
 #include <samc20g16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20G17A)
+#elif defined(CONFIG_SOC_SAMC20G17A)
 #include <samc20g17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20G18A)
+#elif defined(CONFIG_SOC_SAMC20G18A)
 #include <samc20g18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20J15A)
+#elif defined(CONFIG_SOC_SAMC20J15A)
 #include <samc20j15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20J16A)
+#elif defined(CONFIG_SOC_SAMC20J16A)
 #include <samc20j16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20J17A)
+#elif defined(CONFIG_SOC_SAMC20J17A)
 #include <samc20j17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20J17AU)
+#elif defined(CONFIG_SOC_SAMC20J18A)
-#include <samc20j17au.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20J18A)
 #include <samc20j18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20J18AU)
+#elif defined(CONFIG_SOC_SAMC20J17AU)
+#include <samc20j17au.h>
+#elif defined(CONFIG_SOC_SAMC20J18AU)
 #include <samc20j18au.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20N17A)
+#elif defined(CONFIG_SOC_SAMC20N17A)
 #include <samc20n17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC20N18A)
+#elif defined(CONFIG_SOC_SAMC20N18A)
 #include <samc20n18a.h>
 #else
 #error Library does not support the specified device.
@@ -67,4 +67,4 @@
 #define SOC_ATMEL_SAM0_MCK_FREQ_HZ SOC_ATMEL_SAM0_HCLK_FREQ_HZ
 #define SOC_ATMEL_SAM0_GCLK0_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 
-#endif /* _ATMEL_SAMD51_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAMC20_SOC_H_ */

soc/atmel/sam0/samc21/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/samc21/Kconfig

@@ -1,18 +1,13 @@
 # Atmel SAMC21 MCU series
 
 # Copyright (c) 2022 Kamil Serwus
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAMC21
-	bool "Atmel SAMC21 MCU"
 	select ARM
 	select CPU_CORTEX_M0PLUS
 	select CPU_CORTEX_M_HAS_SYSTICK
 	select CPU_CORTEX_M_HAS_VTOR
 	select CPU_HAS_ARM_MPU
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAMC21 Cortex-M0+ microcontrollers.

soc/atmel/sam0/samc21/Kconfig.defconfig

@@ -0,0 +1,12 @@
+# Atmel SAMC21 MCU series configuration options
+
+# Copyright (c) 2022 Kamil Serwus
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAMC21
+
+config NUM_IRQS
+	default 32
+
+endif # SOC_SERIES_SAMC21

soc/atmel/sam0/samc21/Kconfig.soc

@@ -0,0 +1,98 @@
+# Atmel SAMC21 MCU series
+
+# Copyright (c) 2022 Kamil Serwus
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAMC21
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAMC21 Cortex-M0+ microcontrollers.
+
+config SOC_SERIES
+	default "samc21" if SOC_SERIES_SAMC21
+
+config SOC_SAMC21E15A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21E16A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21E17A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21E18A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21G15A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21G16A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21G17A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21G18A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21J15A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21J16A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21J17A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21J18A
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21J17AU
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21J18AU
+	bool
+	select SOC_SERIES_SAMC21
+
+config SOC_SAMC21N17A
+	bool
+	select SOC_SERIES_SAMC21
+	select SOC_SERIES_REVISION_N
+
+config SOC_SAMC21N18A
+	bool
+	select SOC_SERIES_SAMC21
+	select SOC_SERIES_REVISION_N
+
+config SOC
+	default "samc21e15a" if SOC_SAMC21E15A
+	default "samc21e16a" if SOC_SAMC21E16A
+	default "samc21e17a" if SOC_SAMC21E17A
+	default "samc21e18a" if SOC_SAMC21E18A
+	default "samc21g15a" if SOC_SAMC21G15A
+	default "samc21g16a" if SOC_SAMC21G16A
+	default "samc21g17a" if SOC_SAMC21G17A
+	default "samc21g18a" if SOC_SAMC21G18A
+	default "samc21j15a" if SOC_SAMC21J15A
+	default "samc21j16a" if SOC_SAMC21J16A
+	default "samc21j17a" if SOC_SAMC21J17A
+	default "samc21j18a" if SOC_SAMC21J18A
+	default "samc21j17au" if SOC_SAMC21J17AU
+	default "samc21j18au" if SOC_SAMC21J18AU
+	default "samc21n17a" if SOC_SAMC21N17A
+	default "samc21n18a" if SOC_SAMC21N18A

soc/atmel/sam0/samc21/soc.h

@@ -1,11 +1,12 @@
 /*
  * Copyright (c) 2022 Kamil Serwus
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAMC_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAMC21_SOC_H_
-#define _ATMEL_SAMC_SOC_H_
+#define _SOC_ATMEL_SAM0_SAMC21_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -13,38 +14,37 @@
 
 #include <zephyr/types.h>
 
-
+#if defined(CONFIG_SOC_SAMC21E15A)
-#if defined(CONFIG_SOC_PART_NUMBER_SAMC21E15A)
 #include <samc21e15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21E16A)
+#elif defined(CONFIG_SOC_SAMC21E16A)
 #include <samc21e16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21E17A)
+#elif defined(CONFIG_SOC_SAMC21E17A)
 #include <samc21e17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21E18A)
+#elif defined(CONFIG_SOC_SAMC21E18A)
 #include <samc21e18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21G15A)
+#elif defined(CONFIG_SOC_SAMC21G15A)
 #include <samc21g15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21G16A)
+#elif defined(CONFIG_SOC_SAMC21G16A)
 #include <samc21g16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21G17A)
+#elif defined(CONFIG_SOC_SAMC21G17A)
 #include <samc21g17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21G18A)
+#elif defined(CONFIG_SOC_SAMC21G18A)
 #include <samc21g18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21J15A)
+#elif defined(CONFIG_SOC_SAMC21J15A)
 #include <samc21j15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21J16A)
+#elif defined(CONFIG_SOC_SAMC21J16A)
 #include <samc21j16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21J17A)
+#elif defined(CONFIG_SOC_SAMC21J17A)
 #include <samc21j17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21J17AU)
+#elif defined(CONFIG_SOC_SAMC21J18A)
-#include <samc21j17au.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21J18A)
 #include <samc21j18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21J18AU)
+#elif defined(CONFIG_SOC_SAMC21J17AU)
+#include <samc21j17au.h>
+#elif defined(CONFIG_SOC_SAMC21J18AU)
 #include <samc21j18au.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21N17A)
+#elif defined(CONFIG_SOC_SAMC21N17A)
 #include <samc21n17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMC21N18A)
+#elif defined(CONFIG_SOC_SAMC21N18A)
 #include <samc21n18a.h>
 #else
 #error Library does not support the specified device.
@@ -67,4 +67,4 @@
 #define SOC_ATMEL_SAM0_MCK_FREQ_HZ SOC_ATMEL_SAM0_HCLK_FREQ_HZ
 #define SOC_ATMEL_SAM0_GCLK0_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 
-#endif /* _ATMEL_SAMD51_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAMC21_SOC_H_ */

soc/atmel/sam0/samd20/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/samd20/Kconfig

@@ -1,17 +1,12 @@
 # Atmel SAMD20 MCU series
 
 # Copyright (c) 2018 Sean Nyekjaer
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAMD20
-	bool "Atmel SAMD20 MCU"
 	select ARM
 	select CPU_CORTEX_M0PLUS
 	select CPU_CORTEX_M_HAS_SYSTICK
 	select CPU_CORTEX_M_HAS_VTOR
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAMD20 Cortex-M0+ microcontrollers.

soc/atmel/sam0/samd20/Kconfig.defconfig

@@ -0,0 +1,12 @@
+# Atmel SAMD20 MCU series configuration options
+
+# Copyright (c) 2018 Sean Nyekjaer
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAMD20
+
+config NUM_IRQS
+	default 25
+
+endif # SOC_SERIES_SAMD20

soc/atmel/sam0/samd20/Kconfig.soc

@@ -0,0 +1,100 @@
+# Atmel SAMD20 MCU series
+
+# Copyright (c) 2018 Sean Nyekjaer
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAMD20
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAMD20 Cortex-M0+ microcontrollers.
+
+config SOC_SERIES
+	default "samd20" if SOC_SERIES_SAMD20
+
+config SOC_SAMD20E14
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20E15
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20E16
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20E17
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20E18
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20G14
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20G15
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20G16
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20G17
+	bool
+
+config SOC_SAMD20G18
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20G17U
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20G18U
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20J14
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20J15
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20J16
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20J17
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC_SAMD20J18
+	bool
+	select SOC_SERIES_SAMD20
+
+config SOC
+	default "samd20e14" if SOC_SAMD20E14
+	default "samd20e15" if SOC_SAMD20E15
+	default "samd20e16" if SOC_SAMD20E16
+	default "samd20e17" if SOC_SAMD20E17
+	default "samd20e18" if SOC_SAMD20E18
+	default "samd20g14" if SOC_SAMD20G14
+	default "samd20g15" if SOC_SAMD20G15
+	default "samd20g16" if SOC_SAMD20G16
+	default "samd20g17" if SOC_SAMD20G17
+	default "samd20g18" if SOC_SAMD20G18
+	default "samd20g17u" if SOC_SAMD20G17U
+	default "samd20g18u" if SOC_SAMD20G18U
+	default "samd20j14" if SOC_SAMD20J14
+	default "samd20j15" if SOC_SAMD20J15
+	default "samd20j16" if SOC_SAMD20J16
+	default "samd20j17" if SOC_SAMD20J17
+	default "samd20j18" if SOC_SAMD20J18

soc/atmel/sam0/samd20/soc.h

@@ -1,12 +1,13 @@
 /*
  * Copyright (c) 2018 Sean Nyekjaer
  * Copyright (c) 2023 Ionut Catalin Pavel <iocapa@iocapa.com>
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAMD_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAMD20_SOC_H_
-#define _ATMEL_SAMD_SOC_H_
+#define _SOC_ATMEL_SAM0_SAMD20_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -14,39 +15,39 @@
 
 #include <zephyr/types.h>
 
-#if defined(CONFIG_SOC_PART_NUMBER_SAMD20E14)
+#if defined(CONFIG_SOC_SAMD20E14)
 #include <samd20e14.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20E15)
+#elif defined(CONFIG_SOC_SAMD20E15)
 #include <samd20e15.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20E16)
+#elif defined(CONFIG_SOC_SAMD20E16)
 #include <samd20e16.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20E17)
+#elif defined(CONFIG_SOC_SAMD20E17)
 #include <samd20e17.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20E18)
+#elif defined(CONFIG_SOC_SAMD20E18)
 #include <samd20e18.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20G14)
+#elif defined(CONFIG_SOC_SAMD20G14)
 #include <samd20g14.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20G15)
+#elif defined(CONFIG_SOC_SAMD20G15)
 #include <samd20g15.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20G16)
+#elif defined(CONFIG_SOC_SAMD20G16)
 #include <samd20g16.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20G17)
+#elif defined(CONFIG_SOC_SAMD20G17)
 #include <samd20g17.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20G17U)
+#elif defined(CONFIG_SOC_SAMD20G18)
-#include <samd20g17u.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20G18)
 #include <samd20g18.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20G18U)
+#elif defined(CONFIG_SOC_SAMD20G17U)
+#include <samd20g17u.h>
+#elif defined(CONFIG_SOC_SAMD20G18U)
 #include <samd20g18u.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20J14)
+#elif defined(CONFIG_SOC_SAMD20J14)
 #include <samd20j14.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20J15)
+#elif defined(CONFIG_SOC_SAMD20J15)
 #include <samd20j15.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20J16)
+#elif defined(CONFIG_SOC_SAMD20J16)
 #include <samd20j16.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20J17)
+#elif defined(CONFIG_SOC_SAMD20J17)
 #include <samd20j17.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD20J18)
+#elif defined(CONFIG_SOC_SAMD20J18)
 #include <samd20j18.h>
 #else
 #error Library does not support the specified device.
@@ -118,4 +119,4 @@
 #define SOC_ATMEL_SAM0_APBB_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_APBC_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 
-#endif /* _ATMEL_SAMD_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAMD20_SOC_H_ */

soc/atmel/sam0/samd21/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/samd21/Kconfig

@@ -1,17 +1,12 @@
 # Atmel SAMD21 MCU series
 
 # Copyright (c) 2017 Google LLC.
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAMD21
-	bool "Atmel SAMD21 MCU"
 	select ARM
 	select CPU_CORTEX_M0PLUS
 	select CPU_CORTEX_M_HAS_SYSTICK
 	select CPU_CORTEX_M_HAS_VTOR
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAMD21 Cortex-M0+ microcontrollers.

soc/atmel/sam0/samd21/Kconfig.defconfig

@@ -0,0 +1,12 @@
+# Atmel SAMD21 MCU series configuration options
+
+# Copyright (c) 2017 Google LLC.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAMD21
+
+config NUM_IRQS
+	default 28
+
+endif # SOC_SERIES_SAMD21

soc/atmel/sam0/samd21/Kconfig.soc

@@ -0,0 +1,90 @@
+# Atmel SAMD21 MCU series
+
+# Copyright (c) 2017 Google LLC.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAMD21
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAMD21 Cortex-M0+ microcontrollers.
+
+config SOC_SERIES
+	default "samd21" if SOC_SERIES_SAMD21
+
+config SOC_SAMD21E15A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21E16A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21E17A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21E18A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21E19A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21G15A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21G16A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21G17A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21G18A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21G17AU
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21G18AU
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21J15A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21J16A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21J17A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC_SAMD21J18A
+	bool
+	select SOC_SERIES_SAMD21
+
+config SOC
+	default "samd21e15a" if SOC_SAMD21E15A
+	default "samd21e16a" if SOC_SAMD21E16A
+	default "samd21e17a" if SOC_SAMD21E17A
+	default "samd21e18a" if SOC_SAMD21E18A
+	default "samd21g15a" if SOC_SAMD21G15A
+	default "samd21g16a" if SOC_SAMD21G16A
+	default "samd21g17a" if SOC_SAMD21G17A
+	default "samd21g18a" if SOC_SAMD21G18A
+	default "samd21g17au" if SOC_SAMD21G17AU
+	default "samd21g18au" if SOC_SAMD21G18AU
+	default "samd21j15a" if SOC_SAMD21J15A
+	default "samd21j16a" if SOC_SAMD21J16A
+	default "samd21j17a" if SOC_SAMD21J17A
+	default "samd21j18a" if SOC_SAMD21J18A

soc/atmel/sam0/samd21/soc.h

@@ -1,12 +1,13 @@
 /*
  * Copyright (c) 2017 Google LLC.
  * Copyright (c) 2023 Ionut Catalin Pavel <iocapa@iocapa.com>
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAMD_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAMD21_SOC_H_
-#define _ATMEL_SAMD_SOC_H_
+#define _SOC_ATMEL_SAM0_SAMD21_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -14,33 +15,33 @@
 
 #include <zephyr/types.h>
 
-#if defined(CONFIG_SOC_PART_NUMBER_SAMD21E15A)
+#if defined(CONFIG_SOC_SAMD21E15A)
 #include <samd21e15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21E16A)
+#elif defined(CONFIG_SOC_SAMD21E16A)
 #include <samd21e16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21E17A)
+#elif defined(CONFIG_SOC_SAMD21E17A)
 #include <samd21e17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21E18A)
+#elif defined(CONFIG_SOC_SAMD21E18A)
 #include <samd21e18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21G15A)
+#elif defined(CONFIG_SOC_SAMD21G15A)
 #include <samd21g15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21G16A)
+#elif defined(CONFIG_SOC_SAMD21G16A)
 #include <samd21g16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21G17A)
+#elif defined(CONFIG_SOC_SAMD21G17A)
 #include <samd21g17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21G17AU)
+#elif defined(CONFIG_SOC_SAMD21G18A)
-#include <samd21g17au.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21G18A)
 #include <samd21g18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21G18AU)
+#elif defined(CONFIG_SOC_SAMD21G17AU)
+#include <samd21g17au.h>
+#elif defined(CONFIG_SOC_SAMD21G18AU)
 #include <samd21g18au.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21J15A)
+#elif defined(CONFIG_SOC_SAMD21J15A)
 #include <samd21j15a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21J16A)
+#elif defined(CONFIG_SOC_SAMD21J16A)
 #include <samd21j16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21J17A)
+#elif defined(CONFIG_SOC_SAMD21J17A)
 #include <samd21j17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD21J18A)
+#elif defined(CONFIG_SOC_SAMD21J18A)
 #include <samd21j18a.h>
 #else
 #error Library does not support the specified device.
@@ -112,4 +113,4 @@
 #define SOC_ATMEL_SAM0_APBB_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_APBC_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 
-#endif /* _ATMEL_SAMD_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAMD21_SOC_H_ */

soc/atmel/sam0/samd51/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/samd51/Kconfig

@@ -1,18 +1,13 @@
 # Atmel SAMD51 MCU series
 
 # Copyright (c) 2019 ML!PA Consulting GmbH
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAMD51
-	bool "Atmel SAMD51 MCU"
 	select ARM
 	select CPU_CORTEX_M4
 	select CPU_CORTEX_M_HAS_DWT
 	select CPU_HAS_ARM_MPU
 	select CPU_HAS_FPU
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAMD51 Cortex-M4F microcontrollers.

soc/atmel/sam0/samd51/Kconfig.defconfig

@@ -0,0 +1,16 @@
+# Atmel SAMD51 MCU series configuration options
+
+# Copyright (c) 2019 ML!PA Consulting GmbH
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAMD51
+
+config NUM_IRQS
+	int
+	default 137
+
+config ROM_START_OFFSET
+	default 0x400 if BOOTLOADER_MCUBOOT
+
+endif # SOC_SERIES_SAMD51

soc/atmel/sam0/samd51/Kconfig.soc

@@ -0,0 +1,62 @@
+# Atmel SAMD51 MCU series
+
+# Copyright (c) 2019 ML!PA Consulting GmbH
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAMD51
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAMD51 Cortex-M4F microcontrollers.
+
+config SOC_SERIES
+	default "samd51" if SOC_SERIES_SAMD51
+
+config SOC_SAMD51G18A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC_SAMD51G19A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC_SAMD51J18A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC_SAMD51J19A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC_SAMD51J20A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC_SAMD51N19A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC_SAMD51N20A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC_SAMD51P19A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC_SAMD51P20A
+	bool
+	select SOC_SERIES_SAMD51
+
+config SOC
+	string
+	default "samd51g18a" if SOC_SAMD51G18A
+	default "samd51g19a" if SOC_SAMD51G19A
+	default "samd51j18a" if SOC_SAMD51J18A
+	default "samd51j19a" if SOC_SAMD51J19A
+	default "samd51j20a" if SOC_SAMD51J20A
+	default "samd51n19a" if SOC_SAMD51N19A
+	default "samd51n20a" if SOC_SAMD51N20A
+	default "samd51p19a" if SOC_SAMD51P19A
+	default "samd51p20a" if SOC_SAMD51P20A

soc/atmel/sam0/samd51/soc.h

@@ -1,11 +1,12 @@
 /*
  * Copyright (c) 2019 ML!PA Consulting GmbH
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAMD51_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAMD51_SOC_H_
-#define _ATMEL_SAMD51_SOC_H_
+#define _SOC_ATMEL_SAM0_SAMD51_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -13,24 +14,23 @@
 
 #include <zephyr/types.h>
 
-
+#if defined(CONFIG_SOC_SAMD51G18A)
-#if defined(CONFIG_SOC_PART_NUMBER_SAMD51G18A)
 #include <samd51g18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD51G19A)
+#elif defined(CONFIG_SOC_SAMD51G19A)
 #include <samd51g19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD51J18A)
+#elif defined(CONFIG_SOC_SAMD51J18A)
 #include <samd51j18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD51J19A)
+#elif defined(CONFIG_SOC_SAMD51J19A)
 #include <samd51j19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD51J20A)
+#elif defined(CONFIG_SOC_SAMD51J20A)
 #include <samd51j20a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD51N19A)
+#elif defined(CONFIG_SOC_SAMD51N19A)
 #include <samd51n19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD51N20A)
+#elif defined(CONFIG_SOC_SAMD51N20A)
 #include <samd51n20a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD51P19A)
+#elif defined(CONFIG_SOC_SAMD51P19A)
 #include <samd51p19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMD51P20A)
+#elif defined(CONFIG_SOC_SAMD51P20A)
 #include <samd51p20a.h>
 #else
 #error Library does not support the specified device.
@@ -53,4 +53,4 @@
 #define SOC_ATMEL_SAM0_GCLK0_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_GCLK2_FREQ_HZ 48000000
 
-#endif /* _ATMEL_SAMD51_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAMD51_SOC_H_ */

soc/atmel/sam0/same51/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/same51/Kconfig

@@ -1,18 +1,13 @@
 # Atmel SAME51 MCU series
 
 # Copyright (c) 2019 ML!PA Consulting GmbH
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAME51
-	bool "Atmel SAME51 MCU"
 	select ARM
 	select CPU_CORTEX_M4
 	select CPU_CORTEX_M_HAS_DWT
 	select CPU_HAS_ARM_MPU
 	select CPU_HAS_FPU
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAME51 Cortex-M4F microcontrollers.

soc/atmel/sam0/same51/Kconfig.defconfig

@@ -0,0 +1,15 @@
+# Atmel SAME51 MCU series configuration options
+
+# Copyright (c) 2019 ML!PA Consulting GmbH
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAME51
+
+config NUM_IRQS
+	default 137
+
+config ROM_START_OFFSET
+	default 0x400 if BOOTLOADER_MCUBOOT
+
+endif # SOC_SERIES_SAME51

soc/atmel/sam0/same51/Kconfig.soc

@@ -0,0 +1,41 @@
+# Atmel SAME51 MCU series
+
+# Copyright (c) 2019 ML!PA Consulting GmbH
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAME51
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAME51 Cortex-M4F microcontrollers.
+
+config SOC_SERIES
+	default "same51" if SOC_SERIES_SAME51
+
+config SOC_SAME51J18A
+	bool
+	select SOC_SERIES_SAME51
+
+config SOC_SAME51J19A
+	bool
+	select SOC_SERIES_SAME51
+
+config SOC_SAME51J20A
+	bool
+	select SOC_SERIES_SAME51
+
+config SOC_SAME51N19A
+	bool
+	select SOC_SERIES_SAME51
+
+config SOC_SAME51N20A
+	bool
+	select SOC_SERIES_SAME51
+
+config SOC
+	default "same51j18a" if SOC_SAME51J18A
+	default "same51j19a" if SOC_SAME51J19A
+	default "same51j20a" if SOC_SAME51J20A
+	default "same51n19a" if SOC_SAME51N19A
+	default "same51n20a" if SOC_SAME51N20A

soc/atmel/sam0/same51/soc.h

@@ -1,11 +1,12 @@
 /*
  * Copyright (c) 2019 ML!PA Consulting GmbH
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAME51_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAME51_SOC_H_
-#define _ATMEL_SAME51_SOC_H_
+#define _SOC_ATMEL_SAM0_SAME51_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -14,15 +15,15 @@
 #include <zephyr/types.h>
 
 
-#if defined(CONFIG_SOC_PART_NUMBER_SAME51J18A)
+#if defined(CONFIG_SOC_SAME51J18A)
 #include <same51j18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME51J19A)
+#elif defined(CONFIG_SOC_SAME51J19A)
 #include <same51j19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME51J20A)
+#elif defined(CONFIG_SOC_SAME51J20A)
 #include <same51j20a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME51N19A)
+#elif defined(CONFIG_SOC_SAME51N19A)
 #include <same51n19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME51N20A)
+#elif defined(CONFIG_SOC_SAME51N20A)
 #include <same51n20a.h>
 #else
 #error Library does not support the specified device.
@@ -46,4 +47,4 @@
 #define SOC_ATMEL_SAM0_GCLK0_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_GCLK2_FREQ_HZ 48000000
 
-#endif /* _ATMEL_SAME51_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAME51_SOC_H_ */

soc/atmel/sam0/same53/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/same53/Kconfig

@@ -1,18 +1,13 @@
 # Atmel SAME53 MCU series
 
 # Copyright (c) 2019 ML!PA Consulting GmbH
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAME53
-	bool "Atmel SAME53 MCU"
 	select ARM
 	select CPU_CORTEX_M4
 	select CPU_CORTEX_M_HAS_DWT
 	select CPU_HAS_ARM_MPU
 	select CPU_HAS_FPU
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAME53 Cortex-M4F microcontrollers.

soc/atmel/sam0/same53/Kconfig.defconfig

@@ -0,0 +1,15 @@
+# Atmel SAME53 MCU series configuration options
+
+# Copyright (c) 2019 ML!PA Consulting GmbH
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAME53
+
+config NUM_IRQS
+	default 137
+
+config ROM_START_OFFSET
+	default 0x400 if BOOTLOADER_MCUBOOT
+
+endif # SOC_SERIES_SAME53

soc/atmel/sam0/same53/Kconfig.soc

@@ -0,0 +1,41 @@
+# Atmel SAME53 MCU series
+
+# Copyright (c) 2019 ML!PA Consulting GmbH
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAME53
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAME53 Cortex-M4F microcontrollers.
+
+config SOC_SERIES
+	default "same53" if SOC_SERIES_SAME53
+
+config SOC_SAME53J18A
+	bool
+	select SOC_SERIES_SAME53
+
+config SOC_SAME53J19A
+	bool
+	select SOC_SERIES_SAME53
+
+config SOC_SAME53J20A
+	bool
+	select SOC_SERIES_SAME53
+
+config SOC_SAME53N19A
+	bool
+	select SOC_SERIES_SAME53
+
+config SOC_SAME53N20A
+	bool
+	select SOC_SERIES_SAME53
+
+config SOC
+	default "same53j18a" if SOC_SAME53J18A
+	default "same53j19a" if SOC_SAME53J19A
+	default "same53j20a" if SOC_SAME53J20A
+	default "same53n19a" if SOC_SAME53N19A
+	default "same53n20a" if SOC_SAME53N20A

soc/atmel/sam0/same53/soc.h

@@ -1,11 +1,12 @@
 /*
  * Copyright (c) 2019 ML!PA Consulting GmbH
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAME53_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAME53_SOC_H_
-#define _ATMEL_SAME53_SOC_H_
+#define _SOC_ATMEL_SAM0_SAME53_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -13,16 +14,15 @@
 
 #include <zephyr/types.h>
 
-
+#if defined(CONFIG_SOC_SAME53J18A)
-#if defined(CONFIG_SOC_PART_NUMBER_SAME53J18A)
 #include <same53j18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME53J19A)
+#elif defined(CONFIG_SOC_SAME53J19A)
 #include <same53j19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME53J20A)
+#elif defined(CONFIG_SOC_SAME53J20A)
 #include <same53j20a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME53N19A)
+#elif defined(CONFIG_SOC_SAME53N19A)
 #include <same53n19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME53N20A)
+#elif defined(CONFIG_SOC_SAME53N20A)
 #include <same53n20a.h>
 #else
 #error Library does not support the specified device.
@@ -46,4 +46,4 @@
 #define SOC_ATMEL_SAM0_GCLK0_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_GCLK2_FREQ_HZ 48000000
 
-#endif /* _ATMEL_SAME53_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAME53_SOC_H_ */

soc/atmel/sam0/same54/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/same54/Kconfig

@@ -1,18 +1,13 @@
 # Atmel SAME54 MCU series
 
 # Copyright (c) 2019 ML!PA Consulting GmbH
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAME54
-	bool "Atmel SAME54 MCU"
 	select ARM
 	select CPU_CORTEX_M4
 	select CPU_CORTEX_M_HAS_DWT
 	select CPU_HAS_ARM_MPU
 	select CPU_HAS_FPU
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAME54 Cortex-M4F microcontrollers.

soc/atmel/sam0/same54/Kconfig.defconfig

@@ -0,0 +1,15 @@
+# Atmel SAME54 MCU series configuration options
+
+# Copyright (c) 2019 ML!PA Consulting GmbH
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAME54
+
+config NUM_IRQS
+	default 137
+
+config ROM_START_OFFSET
+	default 0x400 if BOOTLOADER_MCUBOOT
+
+endif # SOC_SERIES_SAME54

soc/atmel/sam0/same54/Kconfig.soc

@@ -0,0 +1,36 @@
+# Atmel SAME54 MCU series
+
+# Copyright (c) 2019 ML!PA Consulting GmbH
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAME54
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAME54 Cortex-M4F microcontrollers.
+
+config SOC_SERIES
+	default "same54" if SOC_SERIES_SAME54
+
+config SOC_SAME54N19A
+	bool
+	select SOC_SERIES_SAME54
+
+config SOC_SAME54N20A
+	bool
+	select SOC_SERIES_SAME54
+
+config SOC_SAME54P19A
+	bool
+	select SOC_SERIES_SAME54
+
+config SOC_SAME54P20A
+	bool
+	select SOC_SERIES_SAME54
+
+config SOC
+	default "same54n19a" if SOC_SAME54N19A
+	default "same54n20a" if SOC_SAME54N20A
+	default "same54p19a" if SOC_SAME54P19A
+	default "same54p20a" if SOC_SAME54P20A

soc/atmel/sam0/same54/soc.h

@@ -1,11 +1,12 @@
 /*
  * Copyright (c) 2019 ML!PA Consulting GmbH
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAME54_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAME54_SOC_H_
-#define _ATMEL_SAME54_SOC_H_
+#define _SOC_ATMEL_SAM0_SAME54_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -13,14 +14,13 @@
 
 #include <zephyr/types.h>
 
-
+#if defined(CONFIG_SOC_SAME54N19A)
-#if defined(CONFIG_SOC_PART_NUMBER_SAME54N19A)
 #include <same54n19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME54N20A)
+#elif defined(CONFIG_SOC_SAME54N20A)
 #include <same54n20a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME54P19A)
+#elif defined(CONFIG_SOC_SAME54P19A)
 #include <same54p19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAME54P20A)
+#elif defined(CONFIG_SOC_SAME54P20A)
 #include <same54p20a.h>
 #else
 #error Library does not support the specified device.
@@ -45,4 +45,4 @@
 #define SOC_ATMEL_SAM0_GCLK0_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_GCLK2_FREQ_HZ 48000000
 
-#endif /* _ATMEL_SAME54_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAME54_SOC_H_ */

soc/atmel/sam0/saml21/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/saml21/Kconfig

@@ -1,17 +1,12 @@
 # Atmel SAML21 MCU series
 
 # Copyright (c) 2021 Argentum Systems Ltd.
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAML21
-	bool "Atmel SAML21 MCU"
 	select ARM
 	select CPU_CORTEX_M0PLUS
 	select CPU_CORTEX_M_HAS_SYSTICK
 	select CPU_CORTEX_M_HAS_VTOR
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAML21 Cortex-M0+ microcontrollers.

soc/atmel/sam0/saml21/Kconfig.defconfig

@@ -0,0 +1,12 @@
+# Atmel SAML21 MCU series configuration options
+
+# Copyright (c) 2021 Argentum Systems Ltd.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAML21
+
+config NUM_IRQS
+	default 29
+
+endif # SOC_SERIES_SAML21

soc/atmel/sam0/saml21/Kconfig.soc

@@ -0,0 +1,76 @@
+# Atmel SAML21 MCU series
+
+# Copyright (c) 2021 Argentum Systems Ltd.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAML21
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAML21 Cortex-M0+ microcontrollers.
+
+config SOC_SERIES
+	default "saml21" if SOC_SERIES_SAML21
+
+config SOC_SAML21E15B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21E16B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21E17B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21E18B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21G16B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21G17B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21G18B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21J16B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21J17B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21J18B
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21J17BU
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC_SAML21J18BU
+	bool
+	select SOC_SERIES_SAML21
+
+config SOC
+	default "saml21e15b" if SOC_SAML21E15B
+	default "saml21e16b" if SOC_SAML21E16B
+	default "saml21e17b" if SOC_SAML21E17B
+	default "saml21e18b" if SOC_SAML21E18B
+	default "saml21g16b" if SOC_SAML21G16B
+	default "saml21g17b" if SOC_SAML21G17B
+	default "saml21g18b" if SOC_SAML21G18B
+	default "saml21j16b" if SOC_SAML21J16B
+	default "saml21j17b" if SOC_SAML21J17B
+	default "saml21j18b" if SOC_SAML21J18B
+	default "saml21j17bu" if SOC_SAML21J17BU
+	default "saml21j18bu" if SOC_SAML21J18BU

soc/atmel/sam0/saml21/soc.h

@@ -1,38 +1,40 @@
-/* Copyright (c) 2021 Argentum Systems Ltd.
+/*
+ * Copyright (c) 2021 Argentum Systems Ltd.
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAML_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAML21_SOC_H_
-#define _ATMEL_SAML_SOC_H_
+#define _SOC_ATMEL_SAM0_SAML21_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
 #define DONT_USE_CMSIS_INIT
 
-#if defined(CONFIG_SOC_PART_NUMBER_SAML21E15B)
+#if defined(CONFIG_SOC_SAML21E15B)
 #include <saml21e15b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21E16B)
+#elif defined(CONFIG_SOC_SAML21E16B)
 #include <saml21e16b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21E17B)
+#elif defined(CONFIG_SOC_SAML21E17B)
 #include <saml21e17b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21E18B)
+#elif defined(CONFIG_SOC_SAML21E18B)
 #include <saml21e18b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21G16B)
+#elif defined(CONFIG_SOC_SAML21G16B)
 #include <saml21g16b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21G17B)
+#elif defined(CONFIG_SOC_SAML21G17B)
 #include <saml21g17b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21G18B)
+#elif defined(CONFIG_SOC_SAML21G18B)
 #include <saml21g18b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21J16B)
+#elif defined(CONFIG_SOC_SAML21J16B)
 #include <saml21j16b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21J17B)
+#elif defined(CONFIG_SOC_SAML21J17B)
 #include <saml21j17b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21J17BU)
+#elif defined(CONFIG_SOC_SAML21J18B)
-#include <saml21j17bu.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21J18B)
 #include <saml21j18b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAML21J18BU)
+#elif defined(CONFIG_SOC_SAML21J17BU)
+#include <saml21j17bu.h>
+#elif defined(CONFIG_SOC_SAML21J18BU)
 #include <saml21j18bu.h>
 #else
 #error Library does not support the specified device.
@@ -73,4 +75,4 @@
 #define SOC_ATMEL_SAM0_APBB_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_APBC_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 
-#endif /* _ATMEL_SAML_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAML21_SOC_H_ */

soc/atmel/sam0/samr21/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/samr21/Kconfig

@@ -1,17 +1,12 @@
 # Atmel SAMR21 MCU series
 
 # Copyright (c) 2017 Google LLC.
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAMR21
-	bool "Atmel SAMR21 MCU"
 	select ARM
 	select CPU_CORTEX_M0PLUS
 	select CPU_CORTEX_M_HAS_SYSTICK
 	select CPU_CORTEX_M_HAS_VTOR
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAMR21 Cortex-M0+ microcontrollers.

soc/atmel/sam0/samr21/Kconfig.defconfig

@@ -0,0 +1,12 @@
+# Atmel SAMR21 MCU series configuration options
+
+# Copyright (c) 2017 Google LLC.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAMR21
+
+config NUM_IRQS
+	default 28
+
+endif # SOC_SERIES_SAMR21

soc/atmel/sam0/samr21/Kconfig.soc

@@ -0,0 +1,51 @@
+# Atmel SAMR21 MCU series
+
+# Copyright (c) 2017 Google LLC.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAMR21
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAMR21 Cortex-M0+ microcontrollers.
+
+config SOC_SERIES
+	default "samr21" if SOC_SERIES_SAMR21
+
+config SOC_SAMR21E16A
+	bool
+	select SOC_SERIES_SAMR21
+
+config SOC_SAMR21E17A
+	bool
+	select SOC_SERIES_SAMR21
+
+config SOC_SAMR21E18A
+	bool
+	select SOC_SERIES_SAMR21
+
+config SOC_SAMR21E19A
+	bool
+	select SOC_SERIES_SAMR21
+
+config SOC_SAMR21G16A
+	bool
+	select SOC_SERIES_SAMR21
+
+config SOC_SAMR21G17A
+	bool
+	select SOC_SERIES_SAMR21
+
+config SOC_SAMR21G18A
+	bool
+	select SOC_SERIES_SAMR21
+
+config SOC
+	default "samr21e16a" if SOC_SAMR21E16A
+	default "samr21e17a" if SOC_SAMR21E17A
+	default "samr21e18a" if SOC_SAMR21E18A
+	default "samr21e19a" if SOC_SAMR21E19A
+	default "samr21g16a" if SOC_SAMR21G16A
+	default "samr21g17a" if SOC_SAMR21G17A
+	default "samr21g18a" if SOC_SAMR21G18A

soc/atmel/sam0/samr21/soc.h

@@ -1,12 +1,13 @@
 /*
  * Copyright (c) 2017 Google LLC.
  * Copyright (c) 2023 Ionut Catalin Pavel <iocapa@iocapa.com>
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef ZEPHYR_ATMEL_SAMR21_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAMR21_SOC_H_
-#define ZEPHYR_ATMEL_SAMR21_SOC_H_
+#define _SOC_ATMEL_SAM0_SAMR21_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -14,19 +15,19 @@
 
 #include <zephyr/types.h>
 
-#if defined(CONFIG_SOC_PART_NUMBER_SAMR21E16A)
+#if defined(CONFIG_SOC_SAMR21E16A)
 #include <samr21e16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR21E17A)
+#elif defined(CONFIG_SOC_SAMR21E17A)
 #include <samr21e17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR21E18A)
+#elif defined(CONFIG_SOC_SAMR21E18A)
 #include <samr21e18a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR21E19A)
+#elif defined(CONFIG_SOC_SAMR21E19A)
 #include <samr21e19a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR21G16A)
+#elif defined(CONFIG_SOC_SAMR21G16A)
 #include <samr21g16a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR21G17A)
+#elif defined(CONFIG_SOC_SAMR21G17A)
 #include <samr21g17a.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR21G18A)
+#elif defined(CONFIG_SOC_SAMR21G18A)
 #include <samr21g18a.h>
 #else
 #error Library does not support the specified device.
@@ -98,4 +99,4 @@
 #define SOC_ATMEL_SAM0_APBB_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_APBC_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 
-#endif /* ZEPHYR_ATMEL_SAMR21_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAMR21_SOC_H_ */

soc/atmel/sam0/samr34/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/samr34/Kconfig

@@ -1,17 +1,12 @@
 # Atmel SAMR34 MCU series
 
 # Copyright (c) 2021 Argentum Systems Ltd.
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAMR34
-	bool "Atmel SAMR34 MCU"
 	select ARM
 	select CPU_CORTEX_M0PLUS
 	select CPU_CORTEX_M_HAS_SYSTICK
 	select CPU_CORTEX_M_HAS_VTOR
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAMR34 Cortex-M0+ microcontrollers.

soc/atmel/sam0/samr34/Kconfig.defconfig

@@ -0,0 +1,12 @@
+# Atmel SAML MCU series configuration options
+
+# Copyright (c) 2021 Argentum Systems Ltd.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAMR34
+
+config NUM_IRQS
+	default 23
+
+endif # SOC_SERIES_SAMR34

soc/atmel/sam0/samr34/Kconfig.soc

@@ -0,0 +1,31 @@
+# Atmel SAMR34 MCU series
+
+# Copyright (c) 2021 Argentum Systems Ltd.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAMR34
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAMR34 Cortex-M0+ microcontrollers.
+
+config SOC_SERIES
+	default "samr34" if SOC_SERIES_SAMR34
+
+config SOC_SAMR34J16B
+	bool
+	select SOC_SERIES_SAMR34
+
+config SOC_SAMR34J17B
+	bool
+	select SOC_SERIES_SAMR34
+
+config SOC_SAMR34J18B
+	bool
+	select SOC_SERIES_SAMR34
+
+config SOC
+	default "samr34j16b" if SOC_SAMR34J16B
+	default "samr34j17b" if SOC_SAMR34J17B
+	default "samr34j18b" if SOC_SAMR34J18B

soc/atmel/sam0/samr34/soc.h

@@ -1,10 +1,12 @@
-/* Copyright (c) 2021 Argentum Systems Ltd.
+/*
+ * Copyright (c) 2021 Argentum Systems Ltd.
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAMR_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAMR34_SOC_H_
-#define _ATMEL_SAMR_SOC_H_
+#define _SOC_ATMEL_SAM0_SAMR34_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -12,11 +14,11 @@
 
 #include <zephyr/types.h>
 
-#if defined(CONFIG_SOC_PART_NUMBER_SAMR34J16B)
+#if defined(CONFIG_SOC_SAMR34J16B)
 #include <samr34j16b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR34J17B)
+#elif defined(CONFIG_SOC_SAMR34J17B)
 #include <samr34j17b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR34J18B)
+#elif defined(CONFIG_SOC_SAMR34J18B)
 #include <samr34j18b.h>
 #else
 #error Library does not support the specified device.
@@ -57,4 +59,4 @@
 #define SOC_ATMEL_SAM0_APBB_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_APBC_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 
-#endif /* _ATMEL_SAMR_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAMR34_SOC_H_ */

soc/atmel/sam0/samr35/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+zephyr_include_directories(.)

soc/atmel/sam0/samr35/Kconfig

@@ -1,17 +1,12 @@
 # Atmel SAMR35 MCU series
 
 # Copyright (c) 2021 Argentum Systems Ltd.
-# Copyright (c) 2023 Gerson Fernando Budke <nandojve@gmail.com>
+# Copyright (c) 2023-2024 Gerson Fernando Budke <nandojve@gmail.com>
 # SPDX-License-Identifier: Apache-2.0
 
 config SOC_SERIES_SAMR35
-	bool "Atmel SAMR35 MCU"
 	select ARM
 	select CPU_CORTEX_M0PLUS
 	select CPU_CORTEX_M_HAS_SYSTICK
 	select CPU_CORTEX_M_HAS_VTOR
-	select SOC_FAMILY_SAM0
 	select PLATFORM_SPECIFIC_INIT
-	select ASF
-	help
-	  Enable support for Atmel SAMR35 Cortex-M0+ microcontrollers.

soc/atmel/sam0/samr35/Kconfig.defconfig

@@ -0,0 +1,12 @@
+# Atmel SAMR35 MCU series configuration options
+
+# Copyright (c) 2021 Argentum Systems Ltd.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SOC_SERIES_SAMR35
+
+config NUM_IRQS
+	default 23
+
+endif # SOC_SERIES_SAMR35

soc/atmel/sam0/samr35/Kconfig.soc

@@ -0,0 +1,31 @@
+# Atmel SAMR35 MCU series
+
+# Copyright (c) 2021 Argentum Systems Ltd.
+# Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_SAMR35
+	bool
+	select SOC_FAMILY_SAM0
+	help
+	  Enable support for Atmel SAMR35 Cortex-M0+ microcontrollers.
+
+config SOC_SERIES
+	default "samr35" if SOC_SERIES_SAMR35
+
+config SOC_SAMR35J16B
+	bool
+	select SOC_SERIES_SAMR35
+
+config SOC_SAMR35J17B
+	bool
+	select SOC_SERIES_SAMR35
+
+config SOC_SAMR35J18B
+	bool
+	select SOC_SERIES_SAMR35
+
+config SOC
+	default "samr35j16b" if SOC_SAMR35J16B
+	default "samr35j17b" if SOC_SAMR35J17B
+	default "samr35j18b" if SOC_SAMR35J18B

soc/atmel/sam0/samr35/soc.h

@@ -1,10 +1,12 @@
-/* Copyright (c) 2021 Argentum Systems Ltd.
+/*
+ * Copyright (c) 2021 Argentum Systems Ltd.
+ * Copyright (c) 2024 Gerson Fernando Budke <nandojve@gmail.com>
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
-#ifndef _ATMEL_SAMR_SOC_H_
+#ifndef _SOC_ATMEL_SAM0_SAMR35_SOC_H_
-#define _ATMEL_SAMR_SOC_H_
+#define _SOC_ATMEL_SAM0_SAMR35_SOC_H_
 
 #ifndef _ASMLANGUAGE
 
@@ -12,11 +14,11 @@
 
 #include <zephyr/types.h>
 
-#if defined(CONFIG_SOC_PART_NUMBER_SAMR35J16B)
+#if defined(CONFIG_SOC_SAMR35J16B)
 #include <samr35j16b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR35J17B)
+#elif defined(CONFIG_SOC_SAMR35J17B)
 #include <samr35j17b.h>
-#elif defined(CONFIG_SOC_PART_NUMBER_SAMR35J18B)
+#elif defined(CONFIG_SOC_SAMR35J18B)
 #include <samr35j18b.h>
 #else
 #error Library does not support the specified device.
@@ -57,4 +59,4 @@
 #define SOC_ATMEL_SAM0_APBB_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 #define SOC_ATMEL_SAM0_APBC_FREQ_HZ SOC_ATMEL_SAM0_MCK_FREQ_HZ
 
-#endif /* _ATMEL_SAMR_SOC_H_ */
+#endif /* _SOC_ATMEL_SAM0_SAMR35_SOC_H_ */

soc/atmel/sam0/soc.yml

@@ -0,0 +1,138 @@
+family:
+- name: atmel_sam0
+  series:
+  - name: samc20
+    socs:
+    - name: samc20e15a
+    - name: samc20e16a
+    - name: samc20e17a
+    - name: samc20e18a
+    - name: samc20g15a
+    - name: samc20g16a
+    - name: samc20g17a
+    - name: samc20g18a
+    - name: samc20j15a
+    - name: samc20j16a
+    - name: samc20j17a
+    - name: samc20j18a
+    - name: samc20j17au
+    - name: samc20j18au
+    - name: samc20n17a
+    - name: samc20n18a
+  - name: samc21
+    socs:
+    - name: samc21e15a
+    - name: samc21e16a
+    - name: samc21e17a
+    - name: samc21e18a
+    - name: samc21g15a
+    - name: samc21g16a
+    - name: samc21g17a
+    - name: samc21g18a
+    - name: samc21j15a
+    - name: samc21j16a
+    - name: samc21j17a
+    - name: samc21j18a
+    - name: samc21j17au
+    - name: samc21j18au
+    - name: samc21n17a
+    - name: samc21n18a
+  - name: samd20
+    socs:
+    - name: samd20e14
+    - name: samd20e15
+    - name: samd20e16
+    - name: samd20e17
+    - name: samd20e18
+    - name: samd20g14
+    - name: samd20g15
+    - name: samd20g16
+    - name: samd20g17
+    - name: samd20g18
+    - name: samd20g17u
+    - name: samd20g18u
+    - name: samd20j14
+    - name: samd20j15
+    - name: samd20j16
+    - name: samd20j17
+    - name: samd20j18
+  - name: samd21
+    socs:
+    - name: samd21e15a
+    - name: samd21e16a
+    - name: samd21e17a
+    - name: samd21e18a
+    - name: samd21g15a
+    - name: samd21g16a
+    - name: samd21g17a
+    - name: samd21g18a
+    - name: samd21g17au
+    - name: samd21g18au
+    - name: samd21j15a
+    - name: samd21j16a
+    - name: samd21j17a
+    - name: samd21j18a
+  - name: samd51
+    socs:
+    - name: samd51g18a
+    - name: samd51g19a
+    - name: samd51j18a
+    - name: samd51j19a
+    - name: samd51j20a
+    - name: samd51n19a
+    - name: samd51n20a
+    - name: samd51p19a
+    - name: samd51p20a
+  - name: same51
+    socs:
+    - name: same51j18a
+    - name: same51j19a
+    - name: same51j20a
+    - name: same51n19a
+    - name: same51n20a
+  - name: same53
+    socs:
+    - name: same53j18a
+    - name: same53j19a
+    - name: same53j20a
+    - name: same53n19a
+    - name: same53n20a
+  - name: same54
+    socs:
+    - name: same54n19a
+    - name: same54n20a
+    - name: same54p19a
+    - name: same54p20a
+  - name: saml21
+    socs:
+    - name: saml21e15b
+    - name: saml21e16b
+    - name: saml21e17b
+    - name: saml21e18b
+    - name: saml21g16b
+    - name: saml21g17b
+    - name: saml21g18b
+    - name: saml21j16b
+    - name: saml21j17b
+    - name: saml21j18b
+    - name: saml21j17bu
+    - name: saml21j18bu
+  - name: samr21
+    socs:
+    - name: samr21e16a
+    - name: samr21e17a
+    - name: samr21e18a
+    - name: samr21e19a
+    - name: samr21g16a
+    - name: samr21g17a
+    - name: samr21g18a
+  - name: samr34
+    socs:
+    - name: samr34j16b
+    - name: samr34j17b
+    - name: samr34j18b
+  - name: samr35
+    socs:
+    - name: samr35j16b
+    - name: samr35j17b
+    - name: samr35j18b

soc/soc_legacy/arm/atmel_sam0/Kconfig

@@ -1,23 +0,0 @@
-# Atmel SAM0 MCU family configuration options
-
-# Copyright (c) 2017 Google LLC.
-# SPDX-License-Identifier: Apache-2.0
-
-config SOC_FAMILY_SAM0
-	bool
-	select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE
-
-if SOC_FAMILY_SAM0
-
-config SOC_FAMILY
-	string
-	default "atmel_sam0"
-
-source "soc/soc_legacy/arm/atmel_sam0/common/Kconfig.samc2x"
-source "soc/soc_legacy/arm/atmel_sam0/common/Kconfig.saml2x"
-source "soc/soc_legacy/arm/atmel_sam0/common/Kconfig.samd2x"
-source "soc/soc_legacy/arm/atmel_sam0/common/Kconfig.samd5x"
-source "soc/soc_legacy/arm/atmel_sam0/*/Kconfig.soc"
-source "soc/soc_legacy/arm/atmel_sam0/Kconfig.soc.revisions"
-
-endif

soc/soc_legacy/arm/atmel_sam0/Kconfig.defconfig

@@ -1,13 +0,0 @@
-# Atmel SAM0 MCU family default configuration options
-
-# Copyright (c) 2017 Google LLC.
-# SPDX-License-Identifier: Apache-2.0
-
-source "soc/soc_legacy/arm/atmel_sam0/*/Kconfig.defconfig.series"
-
-if SOC_FAMILY_SAM0
-
-config PINCTRL
-	default y
-
-endif # SOC_FAMILY_SAM0

soc/soc_legacy/arm/atmel_sam0/Kconfig.soc

@@ -1,6 +0,0 @@
-# Atmel SAM0 MCU series selection
-
-# Copyright (c) 2017 Google LLC.
-# SPDX-License-Identifier: Apache-2.0
-
-source "soc/soc_legacy/arm/atmel_sam0/*/Kconfig.series"

soc/soc_legacy/arm/atmel_sam0/Kconfig.soc.revisions

@@ -1,10 +0,0 @@
-# Copyright (c) 2022 Gerson Fernando Budke <nandojve@gmail.com>
-# SPDX-License-Identifier: Apache-2.0
-
-config SOC_SERIES_REVISION_N
-	bool
-
-config SOC_SERIES_REVISION
-	string
-	default "n" if SOC_SERIES_REVISION_N
-	default ""

soc/soc_legacy/arm/atmel_sam0/common/Kconfig.defconfig.series

@@ -1,18 +0,0 @@
-# Atmel SAM0 MCU family configuration options
-
-# Copyright (c) 2020 Google LLC.
-# SPDX-License-Identifier: Apache-2.0
-
-if SOC_FAMILY_SAM0
-
-config HWINFO_SAM0
-	default HWINFO
-
-if USB_DEVICE_DRIVER
-
-config HEAP_MEM_POOL_ADD_SIZE_SOC
-	def_int 1024
-
-endif # USB_DEVICE_DRIVER
-
-endif # SOC_FAMILY_SAM0

soc/soc_legacy/arm/atmel_sam0/common/Kconfig.samc2x

@@ -1,6 +0,0 @@
-# Copyright (c) 2022 Kamil Serwus
-# SPDX-License-Identifier: Apache-2.0
-
-if SOC_SERIES_SAMC20 || SOC_SERIES_SAMC21
-
-endif

soc/soc_legacy/arm/atmel_sam0/samc20/Kconfig.defconfig.series

@@ -1,35 +0,0 @@
-# Atmel SAMC MCU series configuration options
-
-# Copyright (c) 2022 Kamil Serwus
-# SPDX-License-Identifier: Apache-2.0
-
-if SOC_SERIES_SAMC20
-
-config SOC_SERIES
-	default "samc20"
-
-config SOC_PART_NUMBER
-	default "samc20e15a" if SOC_PART_NUMBER_SAMC20E15A
-	default "samc20e16a" if SOC_PART_NUMBER_SAMC20E16A
-	default "samc20e17a" if SOC_PART_NUMBER_SAMC20E17A
-	default "samc20e18a" if SOC_PART_NUMBER_SAMC20E18A
-	default "samc20g15a" if SOC_PART_NUMBER_SAMC20G15A
-	default "samc20g16a" if SOC_PART_NUMBER_SAMC20G16A
-	default "samc20g17a" if SOC_PART_NUMBER_SAMC20G17A
-	default "samc20g18a" if SOC_PART_NUMBER_SAMC20G18A
-	default "samc20j15a" if SOC_PART_NUMBER_SAMC20J15A
-	default "samc20j16a" if SOC_PART_NUMBER_SAMC20J16A
-	default "samc20j17a" if SOC_PART_NUMBER_SAMC20J17A
-	default "samc20j17au" if SOC_PART_NUMBER_SAMC20J17AU
-	default "samc20j18a" if SOC_PART_NUMBER_SAMC20J18A
-	default "samc20j18au" if SOC_PART_NUMBER_SAMC20J18AU
-	default "samc20n17a" if SOC_PART_NUMBER_SAMC20N17A
-	default "samc20n18a" if SOC_PART_NUMBER_SAMC20N18A
-
-config NUM_IRQS
-	default 32
-
-config SYS_CLOCK_HW_CYCLES_PER_SEC
-	default	$(dt_node_int_prop_int,/cpus/cpu@0,clock-frequency)
-
-endif # SOC_SERIES_SAMC20

soc/soc_legacy/arm/atmel_sam0/samc20/Kconfig.soc

@@ -1,60 +0,0 @@
-# Atmel SAMC MCU series
-
-# Copyright (c) 2022 Kamil Serwus
-# SPDX-License-Identifier: Apache-2.0
-
-choice
-	prompt "Atmel SAMC20 MCU Selection"
-	depends on SOC_SERIES_SAMC20
-
-config SOC_PART_NUMBER_SAMC20E15A
-	bool "SAMC20E15A"
-
-config SOC_PART_NUMBER_SAMC20E16A
-	bool "SAMC20E16A"
-
-config SOC_PART_NUMBER_SAMC20E17A
-	bool "SAMC20E17A"
-
-config SOC_PART_NUMBER_SAMC20E18A
-	bool "SAMC20E18A"
-
-config SOC_PART_NUMBER_SAMC20G15A
-	bool "SAMC20G15A"
-
-config SOC_PART_NUMBER_SAMC20G16A
-	bool "SAMC20G16A"
-
-config SOC_PART_NUMBER_SAMC20G17A
-	bool "SAMC20G17A"
-
-config SOC_PART_NUMBER_SAMC20G18A
-	bool "SAMC20G18A"
-
-config SOC_PART_NUMBER_SAMC20J15A
-	bool "SAMC20J15A"
-
-config SOC_PART_NUMBER_SAMC20J16A
-	bool "SAMC20J16A"
-
-config SOC_PART_NUMBER_SAMC20J17A
-	bool "SAMC20J17A"
-
-config SOC_PART_NUMBER_SAMC20J17AU
-	bool "SAMC20J17AU"
-
-config SOC_PART_NUMBER_SAMC20J18A
-	bool "SAMC20J18A"
-
-config SOC_PART_NUMBER_SAMC20J18AU
-	bool "SAMC20J18AU"
-
-config SOC_PART_NUMBER_SAMC20N17A
-	bool "SAMC20N17A"
-	select SOC_SERIES_REVISION_N
-
-config SOC_PART_NUMBER_SAMC20N18A
-	bool "SAMC20N18A"
-	select SOC_SERIES_REVISION_N
-
-endchoice

soc/soc_legacy/arm/atmel_sam0/samc21/Kconfig.defconfig.series

@@ -1,35 +0,0 @@
-# Atmel SAMC MCU series configuration options
-
-# Copyright (c) 2022 Kamil Serwus
-# SPDX-License-Identifier: Apache-2.0
-
-if SOC_SERIES_SAMC21
-
-config SOC_SERIES
-	default "samc21"
-
-config SOC_PART_NUMBER
-	default "samc21e15a" if SOC_PART_NUMBER_SAMC21E15A
-	default "samc21e16a" if SOC_PART_NUMBER_SAMC21E16A
-	default "samc21e17a" if SOC_PART_NUMBER_SAMC21E17A
-	default "samc21e18a" if SOC_PART_NUMBER_SAMC21E18A
-	default "samc21g15a" if SOC_PART_NUMBER_SAMC21G15A
-	default "samc21g16a" if SOC_PART_NUMBER_SAMC21G16A
-	default "samc21g17a" if SOC_PART_NUMBER_SAMC21G17A
-	default "samc21g18a" if SOC_PART_NUMBER_SAMC21G18A
-	default "samc21j15a" if SOC_PART_NUMBER_SAMC21J15A
-	default "samc21j16a" if SOC_PART_NUMBER_SAMC21J16A
-	default "samc21j17a" if SOC_PART_NUMBER_SAMC21J17A
-	default "samc21j17au" if SOC_PART_NUMBER_SAMC21J17AU
-	default "samc21j18a" if SOC_PART_NUMBER_SAMC21J18A
-	default "samc21j18au" if SOC_PART_NUMBER_SAMC21J18AU
-	default "samc21n17a" if SOC_PART_NUMBER_SAMC21N17A
-	default "samc21n18a" if SOC_PART_NUMBER_SAMC21N18A
-
-config NUM_IRQS
-	default 32
-
-config SYS_CLOCK_HW_CYCLES_PER_SEC
-	default	$(dt_node_int_prop_int,/cpus/cpu@0,clock-frequency)
-
-endif # SOC_SERIES_SAMC21

soc/soc_legacy/arm/atmel_sam0/samc21/Kconfig.soc

@@ -1,60 +0,0 @@
-# Atmel SAMC MCU series
-
-# Copyright (c) 2022 Kamil Serwus
-# SPDX-License-Identifier: Apache-2.0
-
-choice
-	prompt "Atmel SAMC21 MCU Selection"
-	depends on SOC_SERIES_SAMC21
-
-config SOC_PART_NUMBER_SAMC21E15A
-	bool "SAMC21E15A"
-
-config SOC_PART_NUMBER_SAMC21E16A
-	bool "SAMC21E16A"
-
-config SOC_PART_NUMBER_SAMC21E17A
-	bool "SAMC21E17A"
-
-config SOC_PART_NUMBER_SAMC21E18A
-	bool "SAMC21E18A"
-
-config SOC_PART_NUMBER_SAMC21G15A
-	bool "SAMC21G15A"
-
-config SOC_PART_NUMBER_SAMC21G16A
-	bool "SAMC21G16A"
-
-config SOC_PART_NUMBER_SAMC21G17A
-	bool "SAMC21G17A"
-
-config SOC_PART_NUMBER_SAMC21G18A
-	bool "SAMC21G18A"
-
-config SOC_PART_NUMBER_SAMC21J15A
-	bool "SAMC21J15A"
-
-config SOC_PART_NUMBER_SAMC21J16A
-	bool "SAMC21J16A"
-
-config SOC_PART_NUMBER_SAMC21J17A
-	bool "SAMC21J17A"
-
-config SOC_PART_NUMBER_SAMC21J17AU
-	bool "SAMC21J17AU"
-
-config SOC_PART_NUMBER_SAMC21J18A
-	bool "SAMC21J18A"
-
-config SOC_PART_NUMBER_SAMC21J18AU
-	bool "SAMC21J18AU"
-
-config SOC_PART_NUMBER_SAMC21N17A
-	bool "SAMC21N17A"
-	select SOC_SERIES_REVISION_N
-
-config SOC_PART_NUMBER_SAMC21N18A
-	bool "SAMC21N18A"
-	select SOC_SERIES_REVISION_N
-
-endchoice

soc/soc_legacy/arm/atmel_sam0/samd20/Kconfig.defconfig.series

@@ -1,36 +0,0 @@
-# Atmel SAMD MCU series configuration options
-
-# Copyright (c) 2018 Sean Nyekjaer
-# SPDX-License-Identifier: Apache-2.0
-
-if SOC_SERIES_SAMD20
-
-config SOC_SERIES
-	default "samd20"
-
-config SOC_PART_NUMBER
-	default "samd20e14" if SOC_PART_NUMBER_SAMD20E14
-	default "samd20e15" if SOC_PART_NUMBER_SAMD20E15
-	default "samd20e16" if SOC_PART_NUMBER_SAMD20E16
-	default "samd20e17" if SOC_PART_NUMBER_SAMD20E17
-	default "samd20e18" if SOC_PART_NUMBER_SAMD20E18
-	default "samd20g14" if SOC_PART_NUMBER_SAMD20G14
-	default "samd20g15" if SOC_PART_NUMBER_SAMD20G15
-	default "samd20g16" if SOC_PART_NUMBER_SAMD20G16
-	default "samd20g17" if SOC_PART_NUMBER_SAMD20G17
-	default "samd20g17u" if SOC_PART_NUMBER_SAMD20G17U
-	default "samd20g18" if SOC_PART_NUMBER_SAMD20G18
-	default "samd20g18u" if SOC_PART_NUMBER_SAMD20G18U
-	default "samd20j14" if SOC_PART_NUMBER_SAMD20J14
-	default "samd20j15" if SOC_PART_NUMBER_SAMD20J15
-	default "samd20j16" if SOC_PART_NUMBER_SAMD20J16
-	default "samd20j17" if SOC_PART_NUMBER_SAMD20J17
-	default "samd20j18" if SOC_PART_NUMBER_SAMD20J18
-
-config NUM_IRQS
-	default 25
-
-config SYS_CLOCK_HW_CYCLES_PER_SEC
-	default 48000000
-
-endif # SOC_SERIES_SAMD20

soc/soc_legacy/arm/atmel_sam0/samd20/Kconfig.soc

@@ -1,61 +0,0 @@
-# Atmel SAMD MCU series
-
-# Copyright (c) 2018 Sean Nyekjaer
-# SPDX-License-Identifier: Apache-2.0
-
-choice
-	prompt "Atmel SAMD20 MCU Selection"
-	depends on SOC_SERIES_SAMD20
-
-config SOC_PART_NUMBER_SAMD20E14
-	bool "SAMD20E14"
-
-config SOC_PART_NUMBER_SAMD20E15
-	bool "SAMD20E15"
-
-config SOC_PART_NUMBER_SAMD20E16
-	bool "SAMD20E16"
-
-config SOC_PART_NUMBER_SAMD20E17
-	bool "SAMD20E17"
-
-config SOC_PART_NUMBER_SAMD20E18
-	bool "SAMD20E18"
-
-config SOC_PART_NUMBER_SAMD20G14
-	bool "SAMD20G14"
-
-config SOC_PART_NUMBER_SAMD20G15
-	bool "SAMD20G15"
-
-config SOC_PART_NUMBER_SAMD20G16
-	bool "SAMD20G16"
-
-config SOC_PART_NUMBER_SAMD20G17
-	bool "SAMD20G17"
-
-config SOC_PART_NUMBER_SAMD20G17U
-	bool "SAMD20G17U"
-
-config SOC_PART_NUMBER_SAMD20G18
-	bool "SAMD20G18"
-
-config SOC_PART_NUMBER_SAMD20G18U
-	bool "SAMD20G18U"
-
-config SOC_PART_NUMBER_SAMD20J14
-	bool "SAMD20J14"
-
-config SOC_PART_NUMBER_SAMD20J15
-	bool "SAMD20J15"
-
-config SOC_PART_NUMBER_SAMD20J16
-	bool "SAMD20J16"
-
-config SOC_PART_NUMBER_SAMD20J17
-	bool "SAMD20J17"
-
-config SOC_PART_NUMBER_SAMD20J18
-	bool "SAMD20J18"
-
-endchoice

soc/soc_legacy/arm/atmel_sam0/samd21/Kconfig.defconfig.series

@@ -1,33 +0,0 @@
-# Atmel SAMD MCU series configuration options
-
-# Copyright (c) 2017 Google LLC.
-# SPDX-License-Identifier: Apache-2.0
-
-if SOC_SERIES_SAMD21
-
-config SOC_SERIES
-	default "samd21"
-
-config SOC_PART_NUMBER
-	default "samd21e15a" if SOC_PART_NUMBER_SAMD21E15A
-	default "samd21e16a" if SOC_PART_NUMBER_SAMD21E16A
-	default "samd21e17a" if SOC_PART_NUMBER_SAMD21E17A
-	default "samd21e18a" if SOC_PART_NUMBER_SAMD21E18A
-	default "samd21g15a" if SOC_PART_NUMBER_SAMD21G15A
-	default "samd21g16a" if SOC_PART_NUMBER_SAMD21G16A
-	default "samd21g17a" if SOC_PART_NUMBER_SAMD21G17A
-	default "samd21g17au" if SOC_PART_NUMBER_SAMD21G17AU
-	default "samd21g18a" if SOC_PART_NUMBER_SAMD21G18A
-	default "samd21g18au" if SOC_PART_NUMBER_SAMD21G18AU
-	default "samd21j15a" if SOC_PART_NUMBER_SAMD21J15A
-	default "samd21j16a" if SOC_PART_NUMBER_SAMD21J16A
-	default "samd21j17a" if SOC_PART_NUMBER_SAMD21J17A
-	default "samd21j18a" if SOC_PART_NUMBER_SAMD21J18A
-
-config NUM_IRQS
-	default 28
-
-config SYS_CLOCK_HW_CYCLES_PER_SEC
-	default 48000000
-
-endif # SOC_SERIES_SAMD21

soc/soc_legacy/arm/atmel_sam0/samd21/Kconfig.soc

@@ -1,52 +0,0 @@
-# Atmel SAMD MCU series
-
-# Copyright (c) 2017 Google LLC.
-# SPDX-License-Identifier: Apache-2.0
-
-choice
-	prompt "Atmel SAMD21 MCU Selection"
-	depends on SOC_SERIES_SAMD21
-
-config SOC_PART_NUMBER_SAMD21E15A
-	bool "SAMD21E15A"
-
-config SOC_PART_NUMBER_SAMD21E16A
-	bool "SAMD21E16A"
-
-config SOC_PART_NUMBER_SAMD21E17A
-	bool "SAMD21E17A"
-
-config SOC_PART_NUMBER_SAMD21E18A
-	bool "SAMD21E18A"
-
-config SOC_PART_NUMBER_SAMD21G15A
-	bool "SAMD21G15A"
-
-config SOC_PART_NUMBER_SAMD21G16A
-	bool "SAMD21G16A"
-
-config SOC_PART_NUMBER_SAMD21G17A
-	bool "SAMD21G17A"
-
-config SOC_PART_NUMBER_SAMD21G17AU
-	bool "SAMD21G17AU"
-
-config SOC_PART_NUMBER_SAMD21G18A
-	bool "SAMD21G18A"
-
-config SOC_PART_NUMBER_SAMD21G18AU
-	bool "SAMD21G18AU"
-
-config SOC_PART_NUMBER_SAMD21J15A
-	bool "SAMD21J15A"
-
-config SOC_PART_NUMBER_SAMD21J16A
-	bool "SAMD21J16A"
-
-config SOC_PART_NUMBER_SAMD21J17A
-	bool "SAMD21J17A"
-
-config SOC_PART_NUMBER_SAMD21J18A
-	bool "SAMD21J18A"
-
-endchoice

soc/soc_legacy/arm/atmel_sam0/samd51/Kconfig.defconfig.series

@@ -1,35 +0,0 @@
-# Atmel SAMD51 MCU series configuration options
-
-# Copyright (c) 2019 ML!PA Consulting GmbH
-# SPDX-License-Identifier: Apache-2.0
-
-if SOC_SERIES_SAMD51
-
-config SOC_SERIES
-	string
-	default "samd51"
-
-config SOC_PART_NUMBER
-	string
-	default "samd51g18a" if SOC_PART_NUMBER_SAMD51G18A
-	default "samd51g19a" if SOC_PART_NUMBER_SAMD51G19A
-	default "samd51j18a" if SOC_PART_NUMBER_SAMD51J18A
-	default "samd51j19a" if SOC_PART_NUMBER_SAMD51J19A
-	default "samd51j20a" if SOC_PART_NUMBER_SAMD51J20A
-	default "samd51n19a" if SOC_PART_NUMBER_SAMD51N19A
-	default "samd51n20a" if SOC_PART_NUMBER_SAMD51N20A
-	default "samd51p19a" if SOC_PART_NUMBER_SAMD51P19A
-	default "samd51p20a" if SOC_PART_NUMBER_SAMD51P20A
-
-config NUM_IRQS
-	int
-	default 137
-
-config ROM_START_OFFSET
-	default 0x400 if BOOTLOADER_MCUBOOT
-
-config SYS_CLOCK_HW_CYCLES_PER_SEC
-	int
-	default 120000000
-
-endif # SOC_SERIES_SAMD51

soc/soc_legacy/arm/atmel_sam0/samd51/Kconfig.soc

@@ -1,37 +0,0 @@
-# Atmel SAMD51 MCU series
-
-# Copyright (c) 2019 ML!PA Consulting GmbH
-# SPDX-License-Identifier: Apache-2.0
-
-choice
-	prompt "Atmel SAMD51 MCU Selection"
-	depends on SOC_SERIES_SAMD51
-
-config SOC_PART_NUMBER_SAMD51G18A
-	bool "SAMD51G18A"
-
-config SOC_PART_NUMBER_SAMD51G19A
-	bool "SAMD51G19A"
-
-config SOC_PART_NUMBER_SAMD51J18A
-	bool "SAMD51J18A"
-
-config SOC_PART_NUMBER_SAMD51J19A
-	bool "SAMD51J19A"
-
-config SOC_PART_NUMBER_SAMD51J20A
-	bool "SAMD51J20A"
-
-config SOC_PART_NUMBER_SAMD51N19A
-	bool "SAMD51N19A"
-
-config SOC_PART_NUMBER_SAMD51N20A
-	bool "SAMD51N20A"
-
-config SOC_PART_NUMBER_SAMD51P19A
-	bool "SAMD51P19A"
-
-config SOC_PART_NUMBER_SAMD51P20A
-	bool "SAMD51P20A"
-
-endchoice

soc/soc_legacy/arm/atmel_sam0/same51/Kconfig.defconfig.series

@@ -1,31 +0,0 @@
-# Atmel SAME51 MCU series configuration options
-
-# Copyright (c) 2019 ML!PA Consulting GmbH
-# SPDX-License-Identifier: Apache-2.0
-
-if SOC_SERIES_SAME51
-
-config SOC_SERIES
-	string
-	default "same51"
-
-config SOC_PART_NUMBER
-	string
-	default "same51j18a" if SOC_PART_NUMBER_SAME51J18A
-	default "same51j19a" if SOC_PART_NUMBER_SAME51J19A
-	default "same51j20a" if SOC_PART_NUMBER_SAME51J20A
-	default "same51n19a" if SOC_PART_NUMBER_SAME51N19A
-	default "same51n20a" if SOC_PART_NUMBER_SAME51N20A
-
-config NUM_IRQS
-	int
-	default 137
-
-config ROM_START_OFFSET
-	default 0x400 if BOOTLOADER_MCUBOOT
-
-config SYS_CLOCK_HW_CYCLES_PER_SEC
-	int
-	default 120000000
-
-endif # SOC_SERIES_SAME51