@ -525,16 +525,42 @@ enum {
@@ -525,16 +525,42 @@ enum {
/**
* @ brief Advertise as connectable .
*
* @ deprecated Use @ ref BT_LE_ADV_OPT_CONN instead .
*
* Advertise as connectable . If not connectable then the type of
* advertising is determined by providing scan response data .
* The advertiser address is determined by the type of advertising
* and / or enabling privacy @ kconfig { CONFIG_BT_PRIVACY } .
*
* Starting connectable advertising preallocates a connection
* object . If this fails , the API returns @ c - ENOMEM .
*
* When an advertiser set results in a connection creation , the
* controller automatically disables that advertising set .
*
* If the advertising set was started with @ ref bt_le_adv_start
* without @ ref BT_LE_ADV_OPT_ONE_TIME , the host will attempt to
* resume the advertiser under some conditions .
*/
BT_LE_ADV_OPT_CONNECTABLE __deprecated = BIT ( 0 ) ,
/**
* @ internal
*
* Internal access to the deprecated value to maintain the
* implementation of the deprecated feature .
*
* At the end of the deprecation period , ABI will change so
* ` BT_LE_ADV_OPT_CONN ` is just ` BIT ( 0 ) ` , removing the need for this
* symbol .
*/
BT_LE_ADV_OPT_CONNECTABLE = BIT ( 0 ) ,
_ BT_LE_ADV_OPT_CONNECTABLE= BIT ( 0 ) ,
/**
* @ brief Advertise one time .
*
* @ deprecated Use @ ref BT_LE_ADV_OPT_CONN instead .
*
* Don ' t try to resume connectable advertising after a connection .
* This option is only meaningful when used together with
* BT_LE_ADV_OPT_CONNECTABLE . If set the advertising will be stopped
@ -546,7 +572,35 @@ enum {
@@ -546,7 +572,35 @@ enum {
* @ ref bt_le_ext_adv_start then this behavior is the default behavior
* and this flag has no effect .
*/
BT_LE_ADV_OPT_ONE_TIME = BIT ( 1 ) ,
BT_LE_ADV_OPT_ONE_TIME __deprecated = BIT ( 1 ) ,
/**
* @ internal
*
* Internal access to the deprecated value to maintain
* the implementation of the deprecated feature .
*/
_BT_LE_ADV_OPT_ONE_TIME = BIT ( 1 ) ,
/**
* @ brief Connectable advertising
*
* Starting connectable advertising preallocates a connection
* object . If this fails , the API returns @ c - ENOMEM .
*
* The advertising set stops immediately after it creates a
* connection . This happens automatically in the controller .
*
* @ note To continue advertising after a connection is created ,
* the application should listen for the @ ref bt_conn_cb . connected
* event and start the advertising set again . Note that the
* advertiser cannot be started when all connection objects are
* in use . In that case , defer starting the advertiser until
* @ ref bt_conn_cb . recycled . To continue after a disconnection ,
* listen for @ ref bt_conn_cb . recycled .
*/
BT_LE_ADV_OPT_CONN = BIT ( 0 ) | BIT ( 1 ) ,
/**
* @ brief Advertise using identity address .
@ -625,8 +679,7 @@ enum {
@@ -625,8 +679,7 @@ enum {
* @ brief Support scan response data .
*
* When used together with @ ref BT_LE_ADV_OPT_EXT_ADV then this option
* cannot be used together with the @ ref BT_LE_ADV_OPT_CONNECTABLE
* option .
* cannot be used together with the @ ref BT_LE_ADV_OPT_CONN option .
* When used together with @ ref BT_LE_ADV_OPT_EXT_ADV then scan
* response data must be set .
*/
@ -914,20 +967,61 @@ struct bt_le_per_adv_param {
@@ -914,20 +967,61 @@ struct bt_le_per_adv_param {
BT_LE_ADV_PARAM_INIT ( _options , _int_min , _int_max , _peer ) \
} )
# define BT_LE_ADV_CONN_DIR(_peer) BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONNECTABLE | \
BT_LE_ADV_OPT_ONE_TIME , 0 , 0 , \
_peer )
# define BT_LE_ADV_CONN_DIR(_peer) BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONN, 0, 0, _peer)
/**
* @ deprecated This is a convenience macro for @ ref
* BT_LE_ADV_OPT_CONNECTABLE , which is deprecated . Please use
* @ ref BT_LE_ADV_CONN_FAST_1 or @ ref BT_LE_ADV_CONN_FAST_2
* instead .
*/
# define BT_LE_ADV_CONN \
BT_LE_ADV_PARAM ( BT_LE_ADV_OPT_CONNECTABLE , BT_GAP_ADV_FAST_INT_MIN_2 , \
BT_GAP_ADV_FAST_INT_MAX_2 , NULL ) \
__DEPRECATED_MACRO
# define BT_LE_ADV_CONN BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONNECTABLE, \
BT_GAP_ADV_FAST_INT_MIN_2 , \
BT_GAP_ADV_FAST_INT_MAX_2 , NULL )
/** @brief GAP recommended connectable advertising
*
* This is the recommended default for when a person is likely
* to be waiting the device to connect or be discovered .
*
* Use a longer interval to conserve battery at the cost of
* responsiveness . Consider entering a lower power state with
* longer intervals after a timeout .
*
* GAP recommends advertisers use this " when user-initiated " .
* The application developer decides what this means . It can by
* any time the user interacts with the device , a press on a
* dedicated Bluetooth wakeup button , or anything in - between .
*
* This is the recommended setting for limited discoverable
* mode .
*
* See Bluetooth Core Specification :
* - 3. C . A " Timers and Constants " , T_GAP ( adv_fast_interval1 )
* - 3. C .9 .3 .11 " Connection Establishment Timing parameters "
*/
# define BT_LE_ADV_CONN_FAST_1 \
BT_LE_ADV_PARAM ( BT_LE_ADV_OPT_CONN , BT_GAP_ADV_FAST_INT_MIN_1 , BT_GAP_ADV_FAST_INT_MAX_1 , \
NULL )
/** This is the recommended default for connectable advertisers.
/** @brief Connectable advertising with
* T_GAP ( adv_fast_interval2 )
*
* The advertising interval corresponds to what was offered as
* ` BT_LE_ADV_CONN ` in Zephyr 3.6 and earlier , but unlike
* ` BT_LE_ADV_CONN ` , the host does not automatically resume the
* advertiser after it results in a connection .
*
* See Bluetooth Core Specification :
* - 3. C . A " Timers and Constants " , T_GAP ( adv_fast_interval1 )
* - 3. C .9 .3 .11 " Connection Establishment Timing parameters "
*/
# define BT_LE_ADV_CONN_ONE_TIME \
BT_LE_ADV_PARAM ( BT_LE_ADV_OPT_CONNECTABLE | BT_LE_ADV_OPT_ONE_TIME , \
BT_GAP_ADV_FAST_INT_MIN_2 , BT_GAP_ADV_FAST_INT_MAX_2 , NULL )
# define BT_LE_ADV_CONN_FAST_2 \
BT_LE_ADV_PARAM ( BT_LE_ADV_OPT_CONN , BT_GAP_ADV_FAST_INT_MIN_2 , BT_GAP_ADV_FAST_INT_MAX_2 , \
NULL )
# define BT_LE_ADV_CONN_ONE_TIME BT_LE_ADV_CONN_FAST_2 __DEPRECATED_MACRO
/**
* @ deprecated This macro will be removed in the near future , see
@ -950,11 +1044,9 @@ struct bt_le_per_adv_param {
@@ -950,11 +1044,9 @@ struct bt_le_per_adv_param {
BT_GAP_ADV_FAST_INT_MAX_2 , NULL ) \
__DEPRECATED_MACRO
# define BT_LE_ADV_CONN_DIR_LOW_DUTY(_peer) \
BT_LE_ADV_PARAM ( BT_LE_ADV_OPT_CONNECTABLE | BT_LE_ADV_OPT_ONE_TIME | \
BT_LE_ADV_OPT_DIR_MODE_LOW_DUTY , \
BT_GAP_ADV_FAST_INT_MIN_2 , BT_GAP_ADV_FAST_INT_MAX_2 , \
_peer )
# define BT_LE_ADV_CONN_DIR_LOW_DUTY(_peer) \
BT_LE_ADV_PARAM ( BT_LE_ADV_OPT_CONN | BT_LE_ADV_OPT_DIR_MODE_LOW_DUTY , \
BT_GAP_ADV_FAST_INT_MIN_2 , BT_GAP_ADV_FAST_INT_MAX_2 , _peer )
/** Non-connectable advertising with private address */
# define BT_LE_ADV_NCONN BT_LE_ADV_PARAM(0, BT_GAP_ADV_FAST_INT_MIN_2, \
@ -978,11 +1070,9 @@ struct bt_le_per_adv_param {
@@ -978,11 +1070,9 @@ struct bt_le_per_adv_param {
NULL )
/** Connectable extended advertising */
# define BT_LE_EXT_ADV_CONN BT_LE_ADV_PARAM(BT_LE_ADV_OPT_EXT_ADV | \
BT_LE_ADV_OPT_CONNECTABLE , \
BT_GAP_ADV_FAST_INT_MIN_2 , \
BT_GAP_ADV_FAST_INT_MAX_2 , \
NULL )
# define BT_LE_EXT_ADV_CONN \
BT_LE_ADV_PARAM ( BT_LE_ADV_OPT_EXT_ADV | BT_LE_ADV_OPT_CONN , BT_GAP_ADV_FAST_INT_MIN_2 , \
BT_GAP_ADV_FAST_INT_MAX_2 , NULL )
/**
* @ deprecated This macro will be removed in the near future , see
Aleksander Wasaznik
1 year ago
committed by
Carles Cufí