boards: arm: am62x_m4: Convert to v2

Converts the board to hwmv2

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

boards/arm/am62x_m4/Kconfig.board

@@ -1,14 +0,0 @@
-# Texas Instruments Sitara AM62x-SK-M4 EVM
-#
-# Copyright (c) 2023 Texas Instruments Incorporated
-# Copyright (c) 2023 L Lakshmanan
-#
-# SPDX-License-Identifier: Apache-2.0
-
-config BOARD_AM62X_M4_SK
-	bool "TI AM62x M4 Starter Kit (SK) Evaluation Module (EVM)"
-	depends on SOC_SERIES_AM62X_M4
-
-config BOARD_AM62X_M4_PHYBOARD_LYRA
-	bool "PHYTEC AM62x M4 phyBOARD-Lyra"
-	depends on SOC_SERIES_AM62X_M4

boards/arm/am62x_m4/Kconfig.defconfig

@@ -1,20 +0,0 @@
-# Texas Instruments Sitara AM62x-SK-M4 EVM
-#
-# Copyright (c) 2023 Texas Instruments Incorporated
-# Copyright (c) 2023 L Lakshmanan
-#
-# SPDX-License-Identifier: Apache-2.0
-
-if BOARD_AM62X_M4_SK
-
-config BOARD
-	default "am62x_m4_sk"
-
-endif # BOARD_AM62X_M4_SK
-
-if BOARD_AM62X_M4_PHYBOARD_LYRA
-
-config BOARD
-	default "am62x_m4_phyboard_lyra"
-
-endif # BOARD_AM62X_M4_PHYBOARD_LYRA

boards/arm/am62x_m4/doc/index.rst

@@ -1,38 +0,0 @@
-.. _am62x_m4:
-
-AM62x M4F Core
-##############
-
-Overview
-********
-
-The Texas Instrument AM62x SoC contains a quad Cortex-A53 cluster and a single
-Cortex-M4F core in the MCU domain. This chapter describes all boards with support
-for the M4F subsystem.
-
-Currently the following hardware platforms are supported:
-
-.. toctree::
-   :maxdepth: 1
-
-   am62x_m4_sk.rst
-   am62x_m4_phyboard_lyra.rst
-
-Supported Features
-==================
-
-The AM62x M4F platform supports the following hardware features:
-
-+-----------+------------+-------------------------------------+
-| Interface | Controller | Driver/Component                    |
-+===========+============+=====================================+
-| NVIC      | on-chip    | nested vector interrupt controller  |
-+-----------+------------+-------------------------------------+
-| SYSTICK   | on-chip    | systick                             |
-+-----------+------------+-------------------------------------+
-| PINCTRL   | on-chip    | pinctrl                             |
-+-----------+------------+-------------------------------------+
-| UART      | on-chip    | serial                              |
-+-----------+------------+-------------------------------------+
-
-Other hardware features are not currently supported by the port.

boards/v2/phytec/phyboard_lyra_am62x/Kconfig.phyboard_lyra_am62x

@@ -0,0 +1,11 @@
+# Texas Instruments Sitara AM62x-SK-M4 EVM
+#
+# Copyright (c) 2023 Texas Instruments Incorporated
+# Copyright (c) 2023 L Lakshmanan
+#
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_PHYBOARD_LYRA_AM62X
+	select SOC_AM6234_M4 if BOARD_PHYBOARD_LYRA_AM62X_AM6234_M4
+	help
+	  PHYTEC AM62x M4 phyBOARD-Lyra

boards/v2/phytec/phyboard_lyra_am62x/board.yml

@@ -0,0 +1,5 @@
+board:
+  name: phyboard_lyra_am62x
+  vendor: Phytec
+  socs:
+  - name: am6234

boards/v2/phytec/phyboard_lyra_am62x/doc/index.rst

@@ -104,7 +104,7 @@ To test the M4F core, we build the `hello_world` sample with the following comma
 .. code-block:: console
 
    # From the root of the Zephyr repository
-   west build -p -b am62x_m4_phyboard_lyra samples/hello_world
+   west build -p -b phyboard_lyra_am62x/am6234/m4 samples/hello_world
 
 This builds the program and the binary is present in the `build/zephyr` directory as `zephyr.elf`.
 

boards/v2/phytec/phyboard_lyra_am62x/phyboard_lyra_am62x_am6234_m4.yaml

@@ -1,4 +1,4 @@
-identifier: am62x_m4_phyboard_lyra
+identifier: phyboard_lyra_am62x/am6234/m4
 name: PHYTEC AM62x M4 phyBOARD-Lyra
 type: mcu
 arch: arm

boards/v2/phytec/phyboard_lyra_am62x/phyboard_lyra_am62x_am6234_m4_defconfig

@@ -6,9 +6,6 @@
 # SPDX-License-Identifier: Apache-2.0
 
 # Platform Configuration
-CONFIG_SOC_SERIES_AM62X_M4=y
-CONFIG_SOC_AM62x_M4=y
-CONFIG_BOARD_AM62X_M4_PHYBOARD_LYRA=y
 CONFIG_CORTEX_M_SYSTICK=y
 
 # Zephyr Kernel Configuration

boards/v2/ti/sk_am62/Kconfig.sk_am62

@@ -0,0 +1,11 @@
+# Texas Instruments Sitara AM62x-SK-M4 EVM
+#
+# Copyright (c) 2023 Texas Instruments Incorporated
+# Copyright (c) 2023 L Lakshmanan
+#
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_SK_AM62_AM6234_M4
+	select SOC_AM6234_M4
+	help
+	  TI AM62x M4 Starter Kit (SK) Evaluation Module (EVM)

boards/v2/ti/sk_am62/board.yml

@@ -0,0 +1,5 @@
+board:
+  name: sk_am62
+  vendor: Texas Instruments
+  socs:
+  - name: am6234

boards/v2/ti/sk_am62/doc/index.rst

@@ -1,12 +1,12 @@
-.. _am62x_m4_sk:
+.. _sk_am62:
 
-AM62x-SK M4F Core
+SK-AM62 M4F Core
-#################
+################
 
 Overview
 ********
 
-The AM62x-SK board configuration is used by Zephyr applications that run on
+The SK-AM62 board configuration is used by Zephyr applications that run on
 the TI AM62x platform. The board configuration provides support for the ARM
 Cortex-M4F MCU core and the following features:
 
@@ -19,13 +19,13 @@ See the `TI AM62X Product Page`_ for details.
 
 .. figure:: img/sk_am62_angled.webp
    :align: center
-   :alt: TI AM62x-SK EVM
+   :alt: TI SK-AM62 EVM
 
-   Texas Instruments AM62x SK EVM
+   Texas Instruments SK-AM62 EVM
 
 Hardware
 ********
-The AM62x-SK EVM features the AM62x SoC, which is composed of a quad Cortex-A53
+The SK-AM62 EVM features the AM62x SoC, which is composed of a quad Cortex-A53
 cluster and a single Cortex-M4 core in the MCU domain. Zephyr is ported to run on
 the M4F core and the following listed hardware specifications are used:
 
@@ -42,7 +42,7 @@ the M4F core and the following listed hardware specifications are used:
 Supported Features
 ==================
 
-The am62x_m4_sk configuration supports the following hardware features:
+The sk_am62 configuration supports the following hardware features:
 
 +-----------+------------+-------------------------------------+
 | Interface | Controller | Driver/Component                    |
@@ -102,7 +102,7 @@ To test the M4F core, we build the `hello_world` sample with the following comma
 .. code-block:: console
 
    # From the root of the Zephyr repository
-   west build -p -b am62x_m4_sk samples/hello_world
+   west build -p -b sk_am62/am6234/m4 samples/hello_world
 
 This builds the program and the binary is present in the `build/zephyr` directory as `zephyr.elf`.
 

boards/v2/ti/sk_am62/sk_am62_am6234_m4.yaml

@@ -1,4 +1,4 @@
-identifier: am62x_m4_sk
+identifier: sk_am62/am6234/m4
 name: TI AM62X M4 Starter Kit (SK)
 type: mcu
 arch: arm

boards/v2/ti/sk_am62/sk_am62_am6234_m4_defconfig

@@ -6,9 +6,6 @@
 # SPDX-License-Identifier: Apache-2.0
 
 # Platform Configuration
-CONFIG_SOC_SERIES_AM62X_M4=y
-CONFIG_SOC_AM62x_M4=y
-CONFIG_BOARD_AM62X_M4_SK=y
 CONFIG_CORTEX_M_SYSTICK=y
 
 # Zephyr Kernel Configuration