usb: remove USB_SCD_ATTRIBUTES macro

USB_SCD_ATTRIBUTES is a configuration dependent macro
that does not map any part of the spec and does not
belong to usb_ch9 header.

Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>

include/usb/usb_ch9.h

@@ -220,11 +220,6 @@ struct usb_association_descriptor {
 #define USB_SCD_RESERVED	BIT(7)
 #define USB_SCD_SELF_POWERED	BIT(6)
 #define USB_SCD_REMOTE_WAKEUP	BIT(5)
-#define USB_SCD_ATTRIBUTES	(USB_SCD_RESERVED |			      \
-				 COND_CODE_1(CONFIG_USB_SELF_POWERED,	      \
-					     (USB_SCD_SELF_POWERED), (0)) |   \
-				 COND_CODE_1(CONFIG_USB_DEVICE_REMOTE_WAKEUP, \
-					     (USB_SCD_REMOTE_WAKEUP), (0)))
 
 /** USB Defined Base Class Codes from https://www.usb.org/defined-class-codes */
 #define USB_BCC_AUDIO			0x01

subsys/usb/class/dfu/usb_dfu.c

@@ -155,7 +155,11 @@ struct dev_dfu_mode_descriptor dfu_mode_desc = {
 		.bNumInterfaces = 1,
 		.bConfigurationValue = 1,
 		.iConfiguration = 0,
-		.bmAttributes = USB_SCD_ATTRIBUTES,
+		.bmAttributes = USB_SCD_RESERVED |
+				COND_CODE_1(CONFIG_USB_SELF_POWERED,
+					    (USB_SCD_SELF_POWERED), (0)) |
+				COND_CODE_1(CONFIG_USB_DEVICE_REMOTE_WAKEUP,
+					    (USB_SCD_REMOTE_WAKEUP), (0)),
 		.bMaxPower = CONFIG_USB_MAX_POWER,
 	},
 	.sec_dfu_cfg = {

subsys/usb/usb_descriptor.c

@@ -90,7 +90,11 @@ USBD_DEVICE_DESCR_DEFINE(primary) struct common_descriptor common_desc = {
 		.bNumInterfaces = 0,
 		.bConfigurationValue = 1,
 		.iConfiguration = 0,
-		.bmAttributes = USB_SCD_ATTRIBUTES,
+		.bmAttributes = USB_SCD_RESERVED |
+				COND_CODE_1(CONFIG_USB_SELF_POWERED,
+					    (USB_SCD_SELF_POWERED), (0)) |
+				COND_CODE_1(CONFIG_USB_DEVICE_REMOTE_WAKEUP,
+					    (USB_SCD_REMOTE_WAKEUP), (0)),
 		.bMaxPower = CONFIG_USB_MAX_POWER,
 	},
 };