Slightly rework config version detector to catch the case where neither
CONFIG_VERSION/CONFIG_VERSION_CURRENT is defined in the config file.
Add olddefconfig and use it after the upgrade.
Signed-off-by: Alexey Neyman <stilor@att.net>
This required some rework of the libc selection, as moxiebox is a layer on
top of another libc - newlib.
Also, moxiebox'es host VM (`sandbox`) needs a libcrypto on the host. We will
not have it if we're cross-compiling a canadian cross. Fortunately, all moxiebox
needs from libcrypto is SHA256, and it already includes a standalone implementation
of SHA256 in its runtime. Provide a little wrapper that allows moxiebox use
that implementation for the host binary, too.
Also, automate collecting/printing the list of all packages in a given category
(e.g. LIBC or COMP_TOOLS), generate a list of all Kconfig symbols for a given
category.
Signed-off-by: Alexey Neyman <stilor@att.net>
... for ct-ng configured without --enable-local. Also, install
licenses in subdirectories of the components.
Also, ct-ng configured with --enable-local removed the scripts directory
upon `ct-ng distclean`.
Also, misspelled CT_WGET/CT_CURL variables prevented use of
`ct-ng updatetools`.
Fixes#1091.
Signed-off-by: Alexey Neyman <stilor@att.net>
Automake does not allow us to place the hooks before its generated actions,
and does not allow us to check MAKECMDGOALS, and does not support a mechanism
for disabling make install (such as noinst_SUBDIRS, requested a few times
on automake mailing list). The only way I could preserve the current behavior
is to have a GNUmakefile wrapper that will convert MAKECMDGOAL into a variable
unknown to automake - which seems too convoluted a solution for the problem
being solved.
Hence the approach is to not override anything for --enable-local. It is now
fully handled by selecting different values for CT_xxx_DIR in ct-ng.in; but
at the build-system level, all the variables remain the same. We just don't
support 'make install' in that case anymore; but the ct-ng in the working
copy can be used after a regular 'make' (or 'make all').
Help message for --enable-local updated accordingly.
Signed-off-by: Alexey Neyman <stilor@att.net>
Also, move kconfig.mk into the main driver - we'd want kconfig to be a sub-package
so there's no sense in writing the installation framework for the ct-ng-specific
fragment in an otherwise independent directory.
Signed-off-by: Alexey Neyman <stilor@att.net>
They don't make sense - using same ct-ng won't work with different versions,
so they cannot coexist in the same prefix.
Also localize other configure variables so that their usage is easier to track.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Update .gitignore, do not place .gitignore into directories installed
in bulk
- Remove executable permissions and shebangs from the scripts that are
supposed to be invoked only via ct-ng frontent; prepend them with $(bash).
Despite what showSamples.sh said, it already has some bashisms.
- Remove --with autotools-dev and override dh_update_autotools_config
to avoid having config.{sub,guess} clobbered with older versions
- Install bash completion where Debian (now) expects it
- Update man page to use .\" as the comment delimiter, instead of
undefined macro (."); also, minor text edits.
- Install kconfig.mk without execute permission.
- Remove shell wrappers from 170-localedef-fix-trampoline.patch, we
do not use that for applying patches
- Revoke execute permissions on 210-expat.sh
- Get flags from dpkg-buildflags if available
Signed-off-by: Alexey Neyman <stilor@att.net>
Makes them sorted out by host, and removes the need for similar hack in
samples.mk.
Change how canadian crosses are named: using `=' character resulted in
Glibc build failure.
Move loading config into a common function, CT_LoadConfig.
Signed-off-by: Alexey Neyman <stilor@att.net>
If configured with --enable-local, CT_NG is exported as plain 'ct-ng'
without any path. showSamples.sh then fails to invoke ct-ng (as current
directory is not in $PATH).
Signed-off-by: Alexey Neyman <stilor@att.net>
Some older versions of configure (including the one in GMP 4.3.2)
interpret the $ECHO environment variable as the `echo' utility to
use. CT-NG sets the variable to `:' and exports it if V=0 or V=1
is supplied, breaking the samples using such configure. This currently
includes bfin-unknown-linux-uclibc and powerpc-unknown-linux-uclibc.
Also, correct the description of the V= variable - V=0 is *not* the
default; in fact, default does not correspond to any of the V=[012]
values.
Signed-off-by: Alexey Neyman <stilor@att.net>
Provides a simpler alternative to editing config to enable
CT_ONLY_DOWNLOAD, doing ct-ng build and then restoring .config.
Signed-off-by: Alexey Neyman <stilor@att.net>
It makes more sense to remove the build dir on 'clean' rather than
on 'distclean', since the latter also trashes the .config file.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since anciens.enib.fr has been dead for two months now, without any
hope of recovery, update my e-mail to point to @free.fr instead.
Reported-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Transfrom array variables from pure strings (in the kconfig output)
into proper bash arrays declarations, for feeding to the build scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Users tend to look for the build log in the current working directory,
rather than in the toolchain's installation dir. While bundling the build
log in the toolchain installation dir is nice for distribution and review,
it can be easier to have the build log readily available in the working
directory, as it is quicker to get to it.
So, the build log stays in the working directory until the toolchain is
completely and successfully built, and then a (compressed) copy is made.
Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Do not fail in case either one or both of target/ and
.build/ directories are missing.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The toolchains are now built in .build/ rather than in targets/
so distclean has to get rid of that.
We also clean up the old dir, as users may have old samples that
still refer to the old location.
Do not hide messages during distclean, and do not ignore errors.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The overview.txt file has evolved into more than just an overview.
Split it into chapters, and include the misc tutorials.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
- don't list samples in the main help screen
- improve the samples listing in list-samples
- don't document the 'config' action, it's long dead
- document the 'V' environment variable
- improve on START, STOP and PREFIX environment variables
- add PREFIX and V to autocomplete
- advertise auto-complete at install time
grep is used when generating some .in files (in config.gen). If GREP_OPTIONS
contains --color=always, then the generated files will contains some escape
sequences setting the color, and mconf would choke on those escape sequences.
Always set and export an empty GREP_OPTIONS to avoid that.
Issue reported by Kevin Kirkup <kevin dot kirkup at gmail dot com> :
http://sourceware.org/ml/crossgcc/2009-12/msg00026.html
After all, this is not crosstool, but really crosstool-NG!
/trunk/steps.mk | 2 1 1 0 +-
/trunk/ct-ng.in | 2 1 1 0 +-
2 files changed, 2 insertions(+), 2 deletions(-)
Alexey Neyman
Daniel Black
Yann E. MORIN
Johannes Stezenbach
Yann E. MORIN"